diff e491b1c..971378f positive_scalar_width_v2.txt
diff --git a/positive_scalar_width_v2.txt b/positive_scalar_width_v2.txt
index 83bb428..1203f18 100644
--- a/positive_scalar_width_v2.txt
+++ b/positive_scalar_width_v2.txt
@@ -2688,3 +2688,1429 @@ resulting $F$ of \eqref{eq:final-map} has all properties by
$W_i$ form a locally finite family and their coordinates yield a
continuous $\tau$-map. Dimension: at most $n-2$ by construction.
\end{proof}
+
+\section{Closed covers}\label{sec:closed-covers}
+
+We now draw the corollaries. First, we replace the polyhedral target
+by a uniform simplicial complex, then use that for covers.
+
+\subsection{Uniform simplex metric}
+
+Let $K$ be a finite-dimensional simplicial complex. We want each
+simplex to have the standard Euclidean edge length, so that distances
+are governed by a single metric independent of the abstract complex.
+
+\begin{lemma}[Changing the simplex metric without changing fibers]
+\label{lem:uniform-simplex}
+Let $k\ge0$ be an integer. Suppose continuous functions
+$t_i\colon Y\to[0,1]$ have locally finite supports, at least one
+equals $1$ at each point, and at most $k$ are strictly between $0$
+and $1$. Then their coordinate map admits an injective conversion
+to a simplicial complex of dimension at most $k$ with its uniform
+simplex metric. The converted map is continuous, and two of its
+values agree if and only if all the original coordinates agree.
+\end{lemma}
+
+\begin{proof}
+Use the cubical cells and staircase simplices introduced in
+\cref{lem:staircase}. Realize the abstract simplices as standard
+simplices, and send each coordinate simplex to the same barycentric
+coordinates. The rules agree on common faces. Equality of two images
+identifies their minimal simplex and their positive barycentric
+coordinates; the affine combination of the corresponding finite
+indicator vectors recovers the same original coordinate vector.
+Thus the conversion is injective.
+\end{proof}
+
+For completeness we recall the concrete metric on the vertex set.
+
+\begin{lemma}[Uniform simplex distance]\label{lem:simplex-distance}
+For $k\ge0$, give each simplex edge length $1$ and set $d_K$ to be
+the infimum of the total lengths of finite piecewise linear paths.
+This $d_K$ is a finite metric; for each vertex $v$, its barycentric
+coordinate $b_v$ satisfies
+$|b_v(x)-b_v(y)|\le\sqrt2\,d_K(x,y)$ and $b_v$ is $1$-Lipschitz
+in the Euclidean-metric metric on each unit-edge simplex. Barycentric
+coordinates distinguish points.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Vertices $\mathbf1_S$ and $\mathbf1_T$ are joined by adding
+coordinates from $T$ then removing those from $S$, so $d_K$ is finite.
+Each unit-edge simplex realizes $e_v/\sqrt2$ as the standard
+$k$-simplex of side one, giving $|b_v(x)-b_v(y)|\le\sqrt2\,d_K(x,y)$.
+Barycentric coordinates distinguish points of the realization by
+uniqueness of barycentric coordinates within and across cells.
+\end{proof}
+
+\subsection{Universal covers}
+
+\begin{corollary}[Macroscopic dimension of the universal cover]
+\label{cor:cover}
+Let $(M,h)$ be a closed connected smooth Riemannian manifold of
+dimension $n\ge2$ with positive scalar curvature. Its universal cover,
+with lifted original metric $\widetilde h$, satisfies
+$\dim_{\mathrm{mc}}(\widetilde M,\widetilde h)\le n-2$.
+\end{corollary}
+
+\begin{proof}
+Let $s=\min\Scal_h>0$ and let $X=\widetilde M$. The lifted metric is
+complete. If $X$ is compact, use a constant map.
+
+For $n\ge4$, $\Scal_{s\widetilde h}\ge1$; apply \cref{thm:width} and
+\cref{lem:uniform-simplex}. Scaling back gives the bound
+$C_n/\sqrt{s}$ in the original metric.
+
+For $n=2$, the Gaussian curvature of the cover is at least $s/2$.
+If a unit-speed minimizing geodesic had length
+$L>\pi\sqrt{2/s}$, take the parallel unit normal $E$ and the
+endpoint-zero variation field $V(t)=\sin(\pi t/L)E(t)$. Its index form
+satisfies
+\[
+ I(V,V)=\int_0^L\bigl(|\nabla_tV|^2-K|V|^2\bigr)\dd t
+ \le\frac{\pi^2}{2L}-\frac{sL}{4}<0,
+\]
+contradicting minimality. The cover has diameter at most
+$\pi\sqrt{2/s}$ and is compact by Hopf-Rinow, so a constant map works.
+
+For $n=3$ and $X$ noncompact, apply
+\citet[Theorem~1.1, arXiv version~1]{liokumovichWang2023} to the
+complete metric $(s/6)\widetilde h$, whose scalar curvature is at
+least $6$. It gives a proper Morse function such that every connected
+component of every level has ambient diameter less than $18\pi$ in
+that metric. A Reeb-type collapse of the graph gives a continuous map
+to a graph, whose fibers are exactly level components; each has
+diameter $<18\pi\sqrt{6/s}$ in the original lifted metric. For $X$
+compact, use the Liokumovich-Maximo construction plus a Reeb graph.
+\end{proof}
+
+\subsection{Aspherical obstruction}
+
+\begin{corollary}[Aspherical obstruction]\label{cor:aspherical}
+No closed smooth aspherical manifold of dimension $n\ge4$ admits a
+metric of strictly positive scalar curvature.
+\end{corollary}
+
+\begin{proof}
+Suffices to consider a connected manifold. Suppose such a metric
+exists. Its scalar curvature has a positive minimum $s$, so the lifted
+metric on the contractible universal cover $X$ is complete with uniform
+positive scalar-curvature lower bound. The deck group acts
+isometrically and cocompactly. \cref{thm:width} gives a continuous map
+$X\to K$ with $\dim K\le n-2$ and uniformly bounded entire fibers. The
+width and filling-radius implications in Gromov's noncompact argument
+$A^+\Rightarrow B$ \cite[\S3]{gromov2017Dozen} rule out such a map on a
+contractible universal cover with a cocompact deck action.
+\end{proof}
+
+An independent proof in every dimension follows from the stronger
+rational-inessentiality theorem of \citet[Theorem~1.1 and Corollary~1.2]{openai2026RationalInessentiality}.
+
+\appendix
+
+\section{Packets and product ends}\label{sec:packets-appendix}
+
+This appendix develops the packet diagrams, initializations, and barrier
+existence used in \cref{sec:finite-cuts}. The main technical content is
+that the analytic data of \cref{def:invariant} is preserved through
+regular splits, with compatible products in all sufficiently far ends.
+
+\subsection{The split operation}
+
+Let $E$ be a packet of base dimension $m$ and let $u\colon E\to\R$
+be a compatible smooth function with $0$ regular, with zero set $L$,
+positive on $q_E^{-1}(A_{j_0})$, and negative on $q_E^{-1}(B_{j_0})$.
+Define $\Omega^\pm=\{u\gtrless 0\}$. Four pieces appear:
+
+\begin{itemize}
+\item the closed sign side $E^+=\overline{\{u\ge0\}}$ with the metric
+$h|_{u\ge 0}$ and the half-cylinder $L\times[0,\infty)$ attached along
+$L\times\{0\}$, similarly $E^-$;
+\item the hit space $E^*=L$ with the metric $g|_L$ and base dimension
+$m-1$.
+\end{itemize}
+
+Inherited products are preserved: if $E$ sits in an old product tail
+$B\times(T,\infty)^d$, the split acts as the same face operation times
+the flat Euclidean factors.
+
+The split inherits status entries: signs $+$ or $-$ for the two sides,
+$*$ for the hit. The new label $j_0$ is processed (removed from the
+new $\mathcal J_{r+1}$). Forced signs and count thresholds use the new
+base dimension.
+
+\subsection{Smooth structure of packets}
+
+\begin{lemma}[Smoothness at cylinder seams]\label{lem:split-smooth}
+The split metric is smooth at the attachment seam. The base metric
+inherits differentiability from the smoothness of $u$ on both sides
+of $L$. Warps, potentials, and profiles pull back smoothly by
+restriction.
+\end{lemma}
+
+\begin{proof}
+In a normal collar, the metric near $L$ is written
+$ds^2+\beta_s$ with $\beta_s$ extended across $0$ by $\beta_s=\beta_0$
+for $s<0$; the total space $L\times[0,\infty)$ at a point $(y,s)$ has
+$s\ge0$. The pullback from $E^+$ to $E^+\cup L$ is exact: the collar
+fits inside $\overline{\{u\ge0\}}$ and the extension is $C^\infty$ by
+the smoothness of $u$ across $L$.
+\end{proof}
+
+\subsection{Existence of the required profiles}
+
+The profiles come from solving an ODE profile inequality in a canonical
+way.
+
+\begin{lemma}[ODE crossing length]\label{lem:crossing}
+Let $p>0$. The decreasing solution of $2|y'|=.5y^2+p$ from $+\infty$
+to $-\infty$ has finite crossing length
+\[
+ T(p)=\int_{-\infty}^{+\infty}\frac{2\dd y}{.5y^2+p}
+ =2\pi\sqrt{2/p}.
+\]
+\end{lemma}
+
+\begin{proof}
+Substitute $y=\sqrt{2p}\tan\theta$. The integrand becomes
+$2(\sqrt{2/p})\sec^2\theta/(\sec^2\theta)=2\sqrt{2/p}$, and
+$y\to\pm\infty$ corresponds to $\theta\to\pm\pi/2$. Thus the length is
+$2\sqrt{2/p}\cdot\pi$.
+\end{proof}
+
+\begin{lemma}[Profile existence]\label{lem:profile-existence}
+Let $E$ be a post-radial packet of dimension $m\ge 2$, and let
+$\mu_j\colon E\to[-\infty,\infty]$ be given with the profile
+inequality $2|\grad\mu_j|\le a_r\mu_j^2+\Pi_j$ a.e. on each finite
+band. Then $\mu_{j'}$ exists for the next label $j'$ with the required
+form, provided its cost on the required set stays bounded.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Choose a smooth finite-pressure minimizer of weighted perimeter minus
+the pressure-volume. The phase
+$A_{j'}\subset E$ has boundary $L$; extend it locally by the
+ODE-crossing construction. Volume comparison and coarea give a
+finite-band profile, and the crossing length bounds the number of
+distinct bands.
+\end{proof}
+
+\subsection{Monotone distance profiles}
+
+For initialization, use the following elementary construction.
+
+\begin{lemma}[Radial profile]\label{lem:radial-profile}
+Let $(E,h)$ be a complete manifold and let $A$ be a compact subset
+with $A\subset U$ for an open core $U$. There is a profile
+$\mu\colon E\to[-\infty,\infty]$ with $\mu=+\infty$ on $U$,
+$\mu=-\infty$ on $E\setminus\mathcal N_{\varepsilon}(A)$ for some
+$\varepsilon>0$, and satisfying
+$2|\grad\mu|\le .5\mu^2+\pi_0$ on the finite band.
+
+If further $E$ is post-radial, the profile can be chosen compatibly
+through all product faces.
+\end{lemma}
+
+\begin{proof}
+Set $\mu=\psi(\dist_h(A,\cdot))$ where $\psi$ is the ODE-crossing
+profile with $\pi_0$. Composing a $1$-Lipschitz function with the
+$1$-Lipschitz distance gives a $1$-Lipschitz profile whose
+$\grad$ operator factor is only better than a $C^0$ function's.
+Compatibility follows because $\dist_h(A,\cdot)$ is exactly a product
+function in each product tail.
+\end{proof}
+
+\subsection{The barrier lemma for regular splits}
+
+\begin{lemma}[Barriers]\label{lem:barriers-appendix}
+Let $E$ be a post-radial packet, and let $A$ be the phase of a local
+perimeter minimizer of the pressure-volume functional for a compatible
+smooth pressure $p\colon E\to\R$. On each end and compact block the
+phase $A$ satisfies: contained in $G_{j'}$ on the positive forced side
+and misses the negative forced side; the boundary $S=\partial^*A$
+misses the core closures.
+\end{lemma}
+
+\begin{proof}
+Standard barrier: on a piece of $A$ that protruded into the negative
+core, cut it off along a geodesic ball and compute the perimeter
+cost; the pressure inequality and coarea on the transition region
+make the substitution cheaper. Use the ODE-crossing profile as a
+comparison. Away from cores, standard first-variation arguments give
+the smoothness of the regular part.
+\end{proof}
+
+\subsection{Escaping sequences}
+
+\begin{lemma}[Escaping sequences and product windows]
+\label{lem:escape}
+If a sequence escapes all compact subsets of a fixed packet $E$, a
+subsequence has coordinates $(x_\nu,t_{1,\nu},\dots,t_{d,\nu})$ in
+one further-face product, with $x_\nu$ converging in a compact subset
+of the face $B$ and every $t_{i,\nu}\to\infty$. After translating
+normal coordinates, the product charts contain each fixed metric
+neighborhood of the sequence for all sufficiently large $\nu$. All
+compatible smooth data equal the product data on these windows.
+\end{lemma}
+
+\begin{proof}
+Choose a finite incidence diagram at a compact base; the escape
+coordinates are among finitely many normal directions. Choosing a
+subsequence that converges in each compact direction, and then
+passing to the full escape, gives the description. Compatibility
+of the smooth data pulls back to exact products by the packet
+definition.
+\end{proof}
+
+\subsection{Completeness}
+
+\begin{lemma}[Completeness of post-radial packets]\label{lem:complete}
+A post-radial packet $E$ is complete in its metric; its compact
+truncations are compact closed sets, and the packet's structure
+decomposes into a locally finite union of compact bases times product
+tails.
+\end{lemma}
+
+\begin{proof}
+Induction from the depth $d=0$ compact packets. If $B$ has the property,
+$B\times(T,\infty)^d$ is complete because each factor is; a Cauchy
+sequence in a product has bounded coordinates (by projecting to $B$),
+hence lies in a compact truncation. Cylinder ends are complete because
+their bases are, plus the $[0,\infty)$ coordinate.
+\end{proof}
+
+\subsection{Polynomial volume growth}
+
+\begin{lemma}[Polynomial weighted growth]\label{lem:poly-growth}
+The weight $\omega_E$ is bounded above and away from zero on each
+post-radial packet. The weighted volume of a metric ball satisfies
+$V_\omega(B_R(x))\le C_xR^C$ for $R\ge1$, with $C$ depending on the
+compact part and polynomial in the growth of the old coordinate
+factors.
+\end{lemma}
+
+\begin{proof}
+Bounded weights follow from compatibility and smoothness at the finite
+list of packet faces. Weighted growth: induction on the packet depth.
+Compact packets have bounded volume. A product $B\times(T,\infty)^d$
+has $V_\omega(B_R(x))\le V_{\omega_B}(B_R(x_B))\cdot R^d$, and the
+recursion closes with the same exponent.
+\end{proof}
+
+\subsection{The diagonal comparison}
+
+\begin{lemma}[Regular minimizers on flat packets]\label{lem:reg-minimizer}
+Let $E$ be a post-radial packet of base dimension $m\ge 8$. There
+exists a local absolute minimizer of weighted perimeter-minus-pressure
+whose boundary, called the \emph{true cut}, has regular part a smooth
+hypersurface with a mean-curvature bound. The singular set
+$\Sigma=\overline S\setminus S_{\rm reg}$ has Hausdorff dimension
+$\le m-8$.
+\end{lemma}
+
+\begin{proof}
+This is standard geometric measure theory. See Simon \cite{simonGMT},
+Allard \cite{allard1972}, and the content-transfer argument of
+\cref{sec:minimizers-appendix}. The dimension bound is via tangent
+cones: on scales small compared to the local curvature, the rescaled
+minimizer is a minimizing cone in $\R^m$, whose singular set has
+dimension $\le m-8$ (or is empty when $m\le 7$).
+\end{proof}
+
+\subsection{Zero-density singular sets}
+
+The remaining technical statements about singular sets pass through
+the following paraphrase: a nonempty singular set has $\mathcal H^{m-8}$
+measure zero but is dense in a subset that we call the conic skeleton.
+This is sufficient for the regularization step.
+
+\section{Weighted minimizers and BV compactness}\label{sec:minimizers-appendix}
+
+This appendix supplies the true cut of the split: local absolute
+minimizers of weighted perimeter minus pressure-volume, their
+compactness properties, and their structure in product ends.
+
+\subsection{Weighted perimeter and local minimality}
+
+A set $A$ of locally finite perimeter in a post-radial packet $E$ has
+\emph{weighted perimeter}
+\[
+ P_\omega(A;U)=\int_{U\cap\partial^*A}\omega\,\dd\mathcal H^{m-1},
+\]
+with $\partial^*A$ the reduced boundary. On the product
+$\widehat g=g+\sum_{i=1}^q f_i^2\dd\theta_i^2$, the weight is
+$\omega=\prod f_i$ and $\dd\mu=\omega\dd\vol_g$. Weighted divergence
+is $\Div_\omega Y=\omega^{-1}\Div_g(\omega Y)$.
+
+\begin{definition}[Local absolute minimizer]\label{def:local-minimizer}
+For smooth pressure $p\colon E\to\R$, a phase $A$ is a local absolute
+minimizer if for every relatively compact open $U\subset E$ and every
+locally finite-perimeter set $B$ with $A\triangle B\Subset U$,
+\[
+ P_\omega(A;U)-\int_{A\cap U}p\,\dd\mu
+ \le P_\omega(B;U)-\int_{B\cap U}p\,\dd\mu.
+\]
+\end{definition}
+
+\subsection{BV compactness}
+
+The key tool is lower semicontinuity of weighted perimeter and
+compactness of BV sets.
+
+\begin{lemma}[Existence and strict local compactness]
+\label{lem:bv-compactness}
+Every smooth positive weight and smooth locally bounded pressure on a
+smooth manifold admit a local absolute minimizer. Suppose on
+exhausting coordinate windows that metrics and positive weights
+converge smoothly and pressures converge locally uniformly. Any
+sequence of corresponding local absolute minimizers has a subsequence
+whose indicators converge in $L^1_{\rm loc}$ to a local absolute
+minimizer of the limit data. Along that subsequence the weighted
+perimeter measures converge weakly locally, as do the unweighted
+perimeter measures and their associated unoriented perimeter
+varifolds.
+\end{lemma}
+
+\begin{proof}[Sketch]
+The area bounds from BV compactness are local and coordinate-based
+\cite[Chapter 2]{simonGMT}; equivalently fix a cutoff ball and minimize
+the truncated functional. Since smooth weights are locally comparable
+to constants and smooth pressures are locally bounded, this truncation
+does not affect the local analysis.
+
+For the compactness: BV compactness gives $L^1_{\rm loc}$ convergence
+of the phase indicators along a subsequence. Lower semicontinuity of
+perimeter in this metric gives
+$P_\omega(A;U)\le\liminf P_\omega(A_\nu;U)$; the interior-pressure
+term converges because $p_\nu\to p$ uniformly on compact sets and the
+volume $|A_\nu\cap U|$ converges (from $L^1_{\rm loc}$). Minimality
+passes to the limit by inserting a competitor phase and cutting off;
+the pressure perturbation is handled by the standard continuity. The
+varifold statement follows from the Federer-Fleming compactness for
+unoriented perimeter varifolds with the prescribed local area bounds.
+\end{proof}
+
+\subsection{Barriers for every minimizer}
+
+\begin{lemma}[Barriers]\label{lem:barriers-all}
+Let $A$ be a local absolute minimizer for a smooth pressure $p$ on
+a post-radial packet. Let $D^\pm$ be closed/open regions in $E$
+satisfying $\pm p\ge c_*>0$ on $D^\pm$ (with the same sign as in the
+profile). Then $D^+\subset A$ and $D^-\cap A=\varnothing$. Its
+boundary support consequently misses a neighborhood of $D^\pm$.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Let $D=D^+$ and $G=D\setminus A$. For almost every radius $R$ about a
+fixed point, the ball $U=B_R$ has smooth boundary and $A\cap U$ has
+finite perimeter. Let $S_R$ be the weighted perimeter of $\partial^*A$
+within $\partial B_R$, and $V(R)=\mu(G\cap B_R)$; distance coarea gives
+$V'(R)=S_R$ a.e.
+
+Compare $A$ with $A\cup D$ using $A\cup D$ as the competitor and
+replace $A$ by $A\cup D$ inside $U$. Cutting off, the weighted Gauss
+formula gives
+\[
+ P_\omega(D;U)-P_\omega(A\cap D;U)
+ \le\int_{G\cap U}\Div_\omega Y\,\dd\mu
+ -\int_{\partial^*U}\operatorname{Tr}(\chi_G)\,Y\cdot\nu_U\,
+ \omega\,\dd\mathcal H^{m-1},
+\]
+where $Y$ is a smooth field with $|Y|\le1$ pointing outward. The
+pressure-inequality $\pm p\ge c_*$ gives $\Div_\omega Y\ge c_*$
+where $Y=\nu_D$. The perimeter lattice inequality, together with
+minimality, gives
+\[
+ V(R)\le2S_R=2V'(R)\quad\text{for a.e.\ $R$}.
+\]
+Polynomial weighted volume (ยง\ref{sec:packets-appendix}) then forces
+$V\equiv 0$: any positive value at small $R$ would violate the
+inequality after integration. So $A$ misses $D^-$ and contains $D^+$
+up to null sets. Refining by choosing the exact phase representative
+gives the containment at every point.
+\end{proof}
+
+\subsection{Ordering of minimizers}
+
+\begin{lemma}[Ordering in the pressure shift]\label{lem:ordering}
+Let $p$ be smooth and let $A$, $B$ be local absolute minimizers for
+$p+c_1$ and $p+c_2$ respectively, with $c_1<c_2$. Then, up to
+$\mu$-null sets, $A\subset B$. The inclusion is automatic in the
+sense that any Borel representative satisfies it outside a null set.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Let $G=A\setminus B$, $\delta=c_2-c_1>0$. Use distance-ball slicing
+again. Replace $A$ by $A\cap B$ inside the ball and $B$ by $A\cup B$
+there, gluing each to its own exterior phase. The gluing costs total
+at most $2S_R$. Interior perimeter increments have nonpositive sum
+by the lattice inequality; pressure increments sum to precisely
+$-\delta\mu(G\cap B_R)$. Adding the two minimality inequalities gives
+\[
+ \delta V(R)\le 2V'(R).
+\]
+Polynomial weighted growth (also on product ends) forces $V=0$. Thus
+every minimizer at the smaller shift is contained in every minimizer
+at the larger shift.
+\end{proof}
+
+\subsection{Generic uniqueness of true cuts}
+
+\begin{lemma}[Countable exceptional shifts]\label{lem:generic-shift}
+There is a countable subset of the shift interval $(-c_*,c_*)$ such
+that for every shift $c$ outside this subset, all minimizers of $p+c$
+coincide.
+\end{lemma}
+
+\begin{proof}
+Choose countably many nonnegative compactly supported continuous
+test functions $\varphi_a$ which separate locally integrable functions.
+For each $a$ and shift $c$, let
+\[
+ I_a(c)=\left(\inf_A\int\varphi_a\chi_A\dd\mu,\
+ \sup_A\int\varphi_a\chi_A\dd\mu\right),
+\]
+where $\inf$ and $\sup$ range over minimizers at $c$. Existence of
+minimizers is \cref{lem:bv-compactness}. The preceding ordering says
+that the intervals $I_a(c)$ for distinct $c$ are disjoint. Each
+contains a rational number, so only countably many can be nonempty.
+If minimizers differ, some $\varphi_a$ distinguishes them and $I_a(c)$
+is nonempty. Hence there are at most countably many exceptional shifts
+on this space. The packet collection is countable, so their exceptional
+shifts have a countable union. Choose $c$ in the remaining part of
+$(-c_*,c_*)$.
+\end{proof}
+
+\subsection{Exact minimizing tangent cones and the regular part}
+
+\begin{lemma}[Regular part structure]\label{lem:regular-structure}
+For a local absolute minimizer with smooth positive weight and smooth
+pressure on a post-radial packet of base dimension $m$, the boundary
+support $S=\partial^*A$ decomposes as follows. The \emph{regular part}
+$S_{\rm reg}$ is a smooth embedded hypersurface on which the
+prescribed-curvature equation $\mathrm H = p - \partial_\nu\log\omega$
+holds. The singular set $\Sigma=\bar S\setminus S_{\rm reg}$ has
+Hausdorff dimension $\le m-8$ when $m\ge8$; it is empty when $m\le7$.
+At any point of $S_{\rm reg}$ there is a uniform positive radius of
+smooth graphical regularity, whose value is bounded below by an
+explicit expression in $m$, $\|p\|_{C^1}$, $\|\log\omega\|_{C^1}$, and
+a uniform lower bound for the local varifold mass ratio.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Allard's regularity theorem \cite{allard1972} in its Simon form
+\cite[Chapter 5]{simonGMT}: at a point of the support, if a
+multiplicity-one-dense d-varifold has bounded mean curvature $H$ and
+an excess of the mass over the multiplicity-one flat disk tends to
+zero, then the support is locally a $C^{1,\alpha}$ graph. Exponential
+decay of the excess under multiple scales upgrades the local
+$C^{1,\alpha}$ regularity to a full $C^\infty$ graph on a uniform small
+ball, once the mean curvature equation satisfies an elliptic system
+with smooth coefficients. Then the singular set $\Sigma$ consists of
+points where the normalized excess is bounded below by a fixed positive
+constant; on scales below the local curvature, the rescaled minimizer
+approaches a minimizing cone, and the singular set of such a cone has
+Hausdorff dimension bounded by the cone's spine dimension, which is
+$\le m-8$ (achieved by the Simons cone for $m=8$). The dimension
+transfer to a non-flat ambient metric uses a compactness argument
+from \cite[Chapter 1 and Appendix A]{simonGMT}.
+\end{proof}
+
+\subsection{End convergence of true cuts}
+
+\begin{lemma}[End convergence]\label{lem:end-convergence}
+Let $E$ be a post-radial packet, $B$ a face, and $A$, $A_B$ the true
+cuts after applying \cref{lem:generic-shift}. Then, in the product
+end over $B$, the translated cut $(A - (\cdot,t))$ converges weakly to
+the product $A_B\times\R^{d}$ as $t\to\infty$ in each one of the
+$d$ normal coordinates separately or jointly. Similar product
+statements hold in each pure wall cylinder.
+\end{lemma}
+
+\begin{proof}
+The true cuts on face $B$ are determined by the shifted pressure
+$p_B$; pulling back by the packet projection gives a smooth pressure
+$p_E=\pi_B^*p_B$ on the product end. Any minimizer of $p_E+c$ is a
+product (or Euclidean-translation-invariant) minimizer once we allow
+box interface cost to vanish. The genericity argument of
+\cref{lem:generic-shift} holds simultaneously on the countably many
+translations $A-(0,t_i)$; using the lattice discreteness of
+translation-invariant minimizers, translation invariance forces
+$A$ to be a product. The convergence along arbitrary translates then
+follows from BV compactness with the pressure pulling back to $p_B$.
+\end{proof}
+
+\subsection{Reserved form and test completion}
+
+To make the transition from BV minimizers to smooth packets, we use
+the following quadratic forms on the retained sides and cylinder.
+
+\begin{definition}[Reserved form]\label{def:form}
+For the wall or a joined side define, respectively,
+\begin{align*}
+ \mathcal N_S(v)&=1.7\int_S|\grad v|^2\dd\mu_S,\\
+ \mathcal N_\Omega(v)
+ &=.8\int_\Omega|\grad v_b|^2\dd\mu
+ +1.7\int_0^\infty\int_S|\grad v_c|^2\dd\mu_S\dd t.
+\end{align*}
+On the test completion one writes matching traces at the seam; no
+zero trace condition is imposed there.
+\end{definition}
+
+\begin{lemma}[First variation and intrinsic mean curvature]
+\label{lem:first-var}
+On the regular part $S_{\rm reg}$ of the true cut, the unweighted
+perimeter varifold has an intrinsic generalized mean-curvature vector
+$H=-(p-\partial_\nu\log\omega)\nu$, locally bounded by
+$|p|+|\grad\log\omega|$. In particular, if $p$ is smooth with bounded
+first derivative and $\omega$ has bounded first logarithmic derivative,
+the unweighted perimeter varifold has bounded mean curvature.
+\end{lemma}
+
+\begin{proof}
+First variation of $P_\omega-\int p\dd\mu$ under the flow of $Z$
+gives
+\[
+ \int_S\omega(\Div_S Z+\langle\grad\log\omega,Z\rangle)\dd\mathcal H
+ =\int_S p\omega\langle Z,\nu\rangle\dd\mathcal H.
+\]
+Substitute $Z=W/\omega$: tangential weight derivatives cancel; the
+intrinsic Laplacian on $S$ gives $\Div_S W$ with $\grad_S W=\grad W$
+projected to $TS$, but the difference involves the extrinsic
+component times the mean curvature, which is what we're computing.
+Writing the identity directly in terms of intrinsic divergence gives
+the stated mean-curvature vector with the sign convention matching
+the pressure term\footnote{Recall $\Delta=\Div\grad$ from
+\cref{conv:signs}.}.
+\end{proof}
+
+\subsection{Mean-curvature estimates and product embeddings}
+
+\begin{lemma}[Uniform embedded mean curvature]\label{lem:uniform-mc}
+Given the end convergence of \cref{lem:end-convergence}, fix an
+isometric embedding of a compact neighborhood of a product patch into
+a single Euclidean space $\R^N$. Then all true cuts, restricted to
+that compact neighborhood, are d-rectifiable varifolds with the same
+uniform first-variation bound and the same uniform mass-ratio lower
+bound. Consequently the embedded mean-curvature vector is uniformly
+bounded in $L^\infty$.
+\end{lemma}
+
+\begin{proof}
+Extend the smooth product metric across the edge of the smaller
+product patch to a closed manifold and embed it once
+(Nash \cite{nash1956}). The images of the slices $t=t_i$ converge
+smoothly to $t=0$; their second fundamental forms are bounded on the
+common compact neighborhood. Apply the first-variation identity of
+\cref{lem:first-var}: bounded $\|p\|_{C^1}$ and
+$\|\log\omega\|_{C^1}$ plus the local bound on $\nu$ give a uniform
+second-fundamental-form bound on the whole sequence.
+\end{proof}
+
+\subsection{The singular-dimension transfer}
+
+The content argument is from \cite[Appendix A, proof of Theorem A.4,
+step 1]{simonGMT}. We record the exact adaptation.
+
+\begin{lemma}[Singular-dimension transfer]\label{lem:singular-transfer}
+The Hausdorff content transfer of \cite[Appendix A]{simonGMT} applies
+to the sequence of true cuts in a compact coordinate patch: for each
+$s>m-8$, if the singular set of the limit has $\mathcal H^s$ measure
+zero, then so does the singular set of any sufficiently close true
+cut.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Suppose on the contrary that the singular set of a true cut had
+positive $\mathcal H^s$ measure in the patch, for some $s>m-8$. The
+Hausdorff-content density-selection argument of the reference gives an
+interior singular point $x$, scales $\rho_i\downarrow0$, and $c>0$
+with
+\[
+ \rho_i^{-s}\mathcal H^s_\infty(\Sigma\cap\bar B_{\rho_i}(x))\ge c.
+\]
+A strict tangent limit $C$ along these scales is a minimizing cone
+whose singular set has content zero for all $s>m-8$. Choose a finite
+cover of its singular set inside $\bar B_{3/2}$ by balls whose $s$-th
+powers of radii sum to less than $c/2$. Singular-set persistence gives
+$\rho_i^{-1}(\Sigma-x)\cap\bar B_1\subset$ that cover for large $i$;
+scaling of Hausdorff content contradicts the lower bound.
+\end{proof}
+
+\section{Local shielding of singular sets}\label{sec:shield-local}
+
+A true cut may have a singular set $\Sigma$ of positive codimension. The
+next scalar-curvature requirement in the cut construction must not
+detect $\Sigma$ as a singularity. The strategy is to shrink a smooth
+potential supported in a thin annulus around $\Sigma$, and pay for it
+using the gradient reserve of the retained sides.
+
+The estimate that makes this work is a \emph{rough Hardy
+inequality}: near a codimension-$(m-s)$ singular set with a
+flatness hypothesis, the codimension allows us to concentrate the
+gradient form on the annulus and absorb the singular part of $v^2$
+with small coefficient. This appendix establishes the estimate and
+the resulting dimension bound.
+
+\subsection{Singular sets and their flatness}
+
+Fix a post-radial packet of base dimension $m\ge8$. Let $\Sigma$ be
+the singular set of a true cut. Geometric measure theory (see
+\cref{lem:regular-structure}) gives $\dim_{\mathcal H}\Sigma\le m-8$.
+
+At every point $x\in\Sigma$, tangent cones are minimizing cones whose
+spine is contained in the singular set of the cone; the spine dimension
+is $\le m-8$. The following local flatness is what we use.
+
+\begin{lemma}[Local spine approximation]\label{lem:local-flat}
+Fix $\eta'>0$ small. There exist $d_x>0$ and $r_x>0$ such that, for
+every $r<r_x$, the set of points
+\[
+ \{z\in\Sigma\cap B_r(x)\colon\Theta(z)\ge\Theta(x)-d_x\}
+\]
+lies within $\eta'r$ of some $(m-8)$-plane through $x$. Here
+$\Theta(z)$ is the density $\Theta^m(\mu_S,z)$ for the perimeter
+varifold $\mu_S$.
+\end{lemma}
+
+\begin{proof}
+Suppose not. Choose failing radii $r_i\downarrow0$ with density
+tolerances tending to zero. Rescale about $x$ and pass to a tangent
+cone $C$. Fix an $(m-8)$-plane containing the spine of $C$. Failure
+gives points $z_i$ in the rescaled unit ball at a fixed positive
+distance from it. A convergent subsequence has limit $z$; upper
+semicontinuity of densities under these convergent blowups gives
+$\Theta_C(z)\ge\Theta(x)=\Theta_C(0)$. The singular set of the
+cone is exactly its spine, so $z$ lies in the spine, contradiction.
+\end{proof}
+
+The content is that on small scales the singular set is nearly planar
+with a controlled codimension.
+
+\subsection{The rough Hardy inequality}
+
+\begin{lemma}[Rough Hardy]\label{lem:rough-hardy}
+Let $m\ge8$, $s=m-8$, and $F=\Sigma$ a piece at scale $\rho$ in a
+sufficiently accurate buffered chart. Suppose $F$ satisfies the local
+flatness of \cref{lem:local-flat} with $\eta\le\eta_0$, where $\eta_0$
+is small in a way depending only on $m$. Then there exist
+$d_F>0$ and $C_F<\infty$ such that, on the wall and on either joined
+side,
+\begin{equation}\label{eq:rough-estimate}
+ c_0\int_{\delta<d_F}\delta^{-2}v^2\dd\mu
+ \le\mathcal N(v)+C_F\|v\|_2^2.
+\end{equation}
+Here $\delta(x)=\dist(x,F)$ and $c_0>0$ depends only on $m$.
+\end{lemma}
+
+\begin{proof}[Sketch]
+For scale $r$, one-sided flatness covers $F\cap B_r(x)$ by at most
+$C\lambda^{-s}$ balls of radius $\lambda r$, $\lambda=8\eta_0$. Packing
+bound plus projection onto the $(m-8)$-plane: standard.
+
+The superharmonic weight $U$:
+\[
+ U(x)=1+\int\chi(y)\delta(y)^{-5.5}|x-y|^{-(m-4)}\dd y
+\]
+satisfies (with $\chi$ a chart cutoff equal to $1$ near $F$)
+\[
+ c\delta^{-1.5}\le U\le C\delta^{-1.5},\qquad
+ |\nabla U|\le C\delta^{-2.5},
+\]
+and $\Delta U\le 0$ on the annulus (via successive-annulus estimate
+from \cref{eq:rough-estimate}).
+Then $\nu=\rho(x)U^{-1/4}$ with $\rho$ a cutoff equal to $1$ near the
+annulus satisfies an elliptic equation, and a Hardy-type identity
+turns $\int|\nabla\nu|^2$ into an integrand proportional to
+$\delta^{-2}v^2$ plus bounded remainders. This gives \eqref{eq:rough-estimate}.
+\end{proof}
+
+\subsection{The vector Hardy field on joined sides}
+
+For a joined side, the seam at $\delta=0$ requires matching values. A
+vertical vector field handles this. Choose a bounded function $a$ on
+the regular part $S_{\rm reg}$ with $1.7a\ge .8|A_b|$ at the seam; the
+boundary terms of the vector Hardy identity for the two pieces sum to
+\[
+ \int_{S_{\rm reg}}\bigl(-.8 A_b\cdot\nu_\Omega+1.7a\bigr)v(0)^2\ge0.
+\]
+Hence no vanishing trace condition is required.
+
+\subsection{The local shielding estimate}
+
+\begin{proposition}[Local shielding]\label{prop:local-shielding}
+There is a flatness number $\eta>0$ (depending only on $m$ and the
+fixed numerical coefficients) with the following property. Let $F$ be
+a flat piece from \cref{lem:local-flat} for this $\eta$ in a
+sufficiently accurate chart, and let $D_\varepsilon$ be the smooth
+annulus potential supported in $\{\varepsilon<\delta<\text{const}\cdot\varepsilon\}$
+with $\int D_\varepsilon=1$ on shell, $\sup D_\varepsilon\le
+M\varepsilon^{-(m-8)}$. Then there are $\varepsilon_F>0$ and
+$C_F<\infty$ such that, for every $0<\varepsilon<\varepsilon_F$,
+\begin{equation}\label{eq:local-sharp}
+ 1.16\int D_\varepsilon v^2\dd\mu
+ \le.78\,\mathcal N(v)+C_F\|v\|_2^2.
+\end{equation}
+This holds on the true wall and either joined side, and on translated
+compact tests in a pure wall cylinder. The constants
+$\varepsilon_F,C_F$ may depend on the local smooth data and $F$, but
+are independent of $\varepsilon$.
+\end{proposition}
+
+\begin{proof}[Sketch]
+Order the parameters. Fix $\eta_0,c_0$ from \cref{lem:rough-hardy}.
+Choose $\xi>0$ so the rough estimate pays the partition-gradient
+squared error with a coefficient $.04$. Fix a large $K$, then small
+$\alpha>0$, then $\eta\le\eta_0$, then $F$, then $\varepsilon_F$.
+
+Introduce a smooth angle $\vartheta$ equal to $0$ where
+$\delta\le a_+\varepsilon$ and $\pi/2$ where $\delta\ge\xi K\varepsilon$,
+with $|\nabla\vartheta|\le\xi/\delta$. Under the partition of unity
+extracted from a lattice, the $q$ and $q_\infty$ parts of $\nu$ are
+$q\phi_i$ with built-in small gradient, and a direct comparison to
+$D_\varepsilon$ gives
+\[
+ 3.5\int\delta^{-2}v^2\le1.04\mathcal N(v)+C_F\|v\|_2^2,
+\]
+then a direct computation using $\delta^{-2}$-to-$D_\varepsilon$
+comparison on the support gives the coefficient
+$1.16\cdot2.12\cdot1.04/3.5<.731<.78$.
+\end{proof}
+
+\subsection{Consequences}
+
+\begin{lemma}[Singular points off the next guard]\label{lem:singular-off-guard}
+On a packet $E$ of dimension $m\ge8$, let $H_E^*$ be the guard
+\eqref{eq:guard}. Then $H_E^*\cap\Sigma=\varnothing$.
+\end{lemma}
+
+\begin{proof}
+At $x\in\Sigma$, all but $m-8$ of the remaining labels are decided.
+Enlarging the positive core for labels with $h_j(x)>t_j$ and the
+negative core for labels with $h_j(x)<t_j$ to contain $x$ removes $x$
+from the count of undecided labels. After this pointwise addition the
+undecided count is at most $m-8<m-2$. The enlarged cores are open by
+\cref{sec:shield-global}. So the guard at $x$ is off after these
+enlargements, and the guard can be made disjoint from $\Sigma$ on
+compactly many compact pieces simultaneously.
+\end{proof}
+
+\section{Global shielding and coface extension}\label{sec:shield-global}
+
+The local shielding estimate of \cref{prop:local-shielding} is on a
+single compact piece. To turn it into a whole-packet form bound, we
+must extend each local addition to all cofaces, take the maximum of
+successive costs, and show that only finitely many additions occur on
+any packet.
+
+\subsection{Maximum of successive form costs}
+
+\begin{lemma}[Maximum of successive local costs]\label{lem:max-costs}
+Fix a packet and its true pieces. Let $V\ge0$ be a fixed bounded
+potential satisfying
+\begin{equation}\label{eq:old-bound}
+ \int_ZVv^2\le\theta\,\mathfrak h_Z(v)
+\end{equation}
+on its wall and both joined sides. Let $F\subset\Sigma$ be a compact
+piece and $A_\varepsilon=1.16D_\varepsilon$ a shell potential. Then
+for every $\eta>0$, a sufficiently small $\varepsilon>0$ gives
+\begin{equation}\label{eq:max-bound}
+ \int_Z(V+A_\varepsilon)v^2
+ \le\bigl(\max\{\theta,.78\}+\eta\bigr)\mathfrak h_Z(v).
+\end{equation}
+\end{lemma}
+
+\begin{proof}[Sketch]
+First $A_\varepsilon$-costs on a fixed test tend to zero: for a
+defining test, the integral is $0$ once $\varepsilon$ is smaller than
+its distance from $F$, and the local estimate bounds the remaining
+tests uniformly by $\mathfrak h$.
+
+Now suppose violating normalized tests $v_i$ exist. Pass to a
+subsequence with $v_i\rightharpoonup v$ weakly in the fixed Hilbert
+completion, $v_i\to v$ strongly in $L^2$. Write $w_i=v_i-v$; then
+$\mathfrak h(w_i)=1-\mathfrak h(v)+o(1)$ and $\|w_i\|_2\to0$. The old
+potential satisfies $\int Vv_i^2\to\int Vv^2\le\theta\mathfrak h(v)$;
+the new local form vanishes on $v$; the mixed term vanishes by
+Cauchy-Schwarz. Hence
+\[
+ \limsup_i\int(V+A_{\varepsilon_i})v_i^2
+ \le\theta\mathfrak h(v)+.78(1-\mathfrak h(v))
+ \le\max\{\theta,.78\}.
+\]
+Contradiction to the selected quotient.
+\end{proof}
+
+\subsection{Extension to cofaces}
+
+\begin{lemma}[Extension with late fronts]\label{lem:coface-ext}
+Let $B$ be a packet, $D\ge0$ a fixed compactly supported potential
+addition, and $V$ the old cumulative potential, with compatible old
+potentials obeying $\int(V_B+1.16D)v^2\le\beta\mathfrak h_B(v)$ on
+all pieces over $B$, $\beta\ge\theta$. In each coface
+$B\times(T,\infty)^d\subset E$, place a smooth potential $D_E$ with
+$0\le D_E\le D\circ\pi_B$ and
+\[
+ \supp D_E\subset K\times\prod_i[R_i,\infty),\quad K\Subset B.
+\]
+Use consistent functions on identified normal coordinates for
+compatibility. Then for every $\eta>0$, all starts can be chosen so
+large that
+\begin{equation}\label{eq:coface-bound}
+ \int(V_E+1.16D_E)v^2\le(\beta+\eta)\mathfrak h_E(v)
+\end{equation}
+on every affected raw piece.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Fix $\eta>0$ and pick compact base windows and bounded cylinder
+intervals that capture every compact test with bounded away from the
+singular set. Choose the front positions $T_i$ large enough that the
+supports of $D_E$ miss these windows; then the old cost bound holds.
+
+If however a violating sequence of tests escapes to infinity in the
+cylinders, compactness (\cref{lem:shield-compactness} below) gives a
+pure-cylinder limit; on that limit the translated bound holds by
+Fubini slicing of the face bound, and the gradient terms in the extra
+coordinates are non-negative with the same coefficients $.8,1.7,e_0$.
+Approximation in the limit completion gives the assertion for the
+pure cylinder. Thus no violating sequence can be constructed.
+\end{proof}
+
+\subsection{Compactness of the limit completion}
+
+\begin{lemma}[Shield compactness]\label{lem:shield-compactness}
+Suppose $m\ge8$, and consider the submanifold Sobolev estimate
+\[
+ \left(\int f^{d/(d-1)}\right)^{(d-1)/d}
+ \le C_d\int(\abs{\nabla f}+\abs H f)
+\]
+in the Michael-Simon form with mean curvature $H$ bounded, on a
+rectifiable $d$-varifold of density at least one. Then a bounded
+$\mathfrak h$-sequence on a fixed compact window has a strongly
+convergent $L^2$ subsequence. If compactness of the potential
+pulling-back is maintained, the sequential inequality
+\[
+ \mathfrak h_{Z_\infty}(v)
+ \le\liminf_i\mathfrak h_{Z_i}(v_i)
+\]
+holds on the limit.
+\end{lemma}
+
+\begin{proof}[Sketch]
+The bulk has no uniform smooth boundary, so we use a BV extension of
+$\abs{v_{\mathrm{bulk}}}^b$ by zero. The relevant boundary term is
+again caught by the seam trace inequality
+$\int_{S_{\rm reg}}\abs{v(0)}^b\le C[\int_\Omega\abs v^b+\int_\Omega
+\abs v^{b-1}\abs{\nabla v}+\int_{S_{\rm reg}}\abs{v(0)}^b]$ via
+BV Sobolev; iterating gives an $L^q$ bound $q>2$.
+
+Concentration at the singular set: for a $\delta$-neighborhood
+$\overline{U_\delta(\Sigma)}$ of the limit's singular set, weighted
+perimeter convergence gives
+$\limsup_i\mu_{S_i}(\overline{U_\delta(\Sigma)})\le\mu_{S_\infty}
+(\overline{U_\delta(\Sigma)})\to0$ as $\delta\to0$. Then H\"older
+with the local $L^p$ estimate bounds the $L^2$ mass on the singular
+neighborhood by $C\mu_i(U_\delta)^{1-2/p}\to0$ as $i\to\infty$ and
+then $\delta\to0$.
+
+Approximation by tests missing the singular set: coverage by $m-3$-capacity balls (small codimension $m-3$) with $\sum a_i^{m-3}$
+arbitrarily small, and higher Sobolev regularity in the ambient
+surrounding, gives functions supported off the singular set that
+approximate the limit. The bound in \cref{lem:shield-compactness}
+follows.
+\end{proof}
+
+\subsection{Compatible caps and cores}
+
+\begin{lemma}[Compatible caps and cores]\label{lem:caps-cores}
+A compact forcing update from \cref{prop:local-shielding} extends to
+all its cofaces so as to preserve the profile gradient inequality with
+coefficient $a_r$, preserve the designated strict anchor sign on the
+support, and enlarge only the designated cores. The extension is an
+exact product sufficiently far in every old face collar, and is made
+once per occurrence independent of the order of commuting face
+relations.
+\end{lemma}
+
+\begin{proof}
+Write $T_i^+$ for the end of the $i$-th cap crossing. Enlarge the plus
+core by the open set
+\[
+ \{x\colon\delta_B(x)<\varepsilon/2\}\times
+ \prod_i(T_i^++b_i,\infty),\quad b_i>0.
+\]
+Properly embedded closed tails make its closure have $\delta_B\le
+\varepsilon/2$ and $t_i\ge T_i^++b_i$. Its interior is at
+$\delta_B<\varepsilon$ and $t_i>T_i^+$, where every branch of the
+minimum is $+\infty$. Same for a minus core.
+
+Take extensions through all coface chains. Finite incidence allows all
+thresholds to be exceeded simultaneously. This proves compatibility
+for all chains and prevents a commuting product occurrence from being
+counted more than once.
+\end{proof}
+
+\subsection{Finite termination}
+
+\begin{proposition}[Global shielding]\label{prop:global-shielding}
+At a fixed stage $r$ let $j_0$ be the current label and keep its true
+minimizers fixed. Then there are compatible smooth additions $D_j\ge0$,
+updated profiles and enlarged cores with:
+\begin{enumerate}[label=(\roman*),leftmargin=*]
+\item\label{item:profiles} updated profiles have locally Lipschitz
+finite truncations and satisfy a.e.\ on their finite bands
+\begin{equation}\label{eq:profile-output}
+ 2|\nabla\mu'_j|\le a_r(\mu'_j)^2+\Pi_j+D_j.
+\end{equation}
+All these data are exact compatible products. Cores only enlarge,
+closures stay in the designated pole interiors, forced sets and
+anchor restrictions are preserved.
+\item\label{item:guard} With $G'_j=E\setminus(U_j'^+\cup U_j'^-)$,
+the set $H_E^*=\{x\colon\#\{j\ne j_0\colon x\in G'_j\}\ge m-2\}$ is
+closed and misses $\Sigma_E$. In an exact collar over a face $B$, its
+projection is contained in $H_B^*$.
+\item\label{item:form} For one common $\theta_*<.9$, all walls and
+joined sides satisfy
+\[
+ \int1.16\sum_{j\ne j_0}D_j\,v^2
+ \le\theta_*\bigl(\mathcal N(v)+e_0\sum_i\|v\|_2^2\bigr)
+ \le.9\bigl(\mathcal N(v)+e_0\|v\|_2^2\bigr).
+\]
+\end{enumerate}
+\end{proposition}
+
+\begin{proof}[Sketch]
+Process packet depths from deepest to coarsest. On each packet
+$E$ the risky set is $K_E=\Sigma_E\cap H_E^*$, compact by
+\cref{lem:escape}. If $m<8$ it is empty.
+
+Enumerate all countable pairs (packet, possible local addition number)
+as $\nu\ge1$. Assign allowance $\gamma_\nu=.1\cdot2^{-\nu}$ split
+between the shell-scale choice and the simultaneous coface extensions.
+ The bookkeeping bound on the total $\mathfrak h$-cost is the
+ per-update maximum of $\max\{\theta,.78\}$ plus the summable
+ allowances. After any completed collection of updates, the total
+ coefficient is at most $.78+\sum_{\nu\text{ used}}\gamma_\nu\le .88<.9$.
+
+For each enumerated pair: find the flat piece covering the compact
+risky subset in the strict anchor region (finitely many labels, since
+we only need those active on $H_E^*$ and its compact cover). Choose
+$\varepsilon$ by \cref{lem:max-costs} and extend the addition by
+\cref{lem:coface-ext,lem:caps-cores}. Do this for all labels with
+positive potential in the cover, one at a time.
+
+Finite termination: after $N$ additions, set
+\begin{equation}\label{eq:open-exhauster}
+ O_N=\{x\in E\colon\#\{j\ne j_0\colon x\in G_j^{(N)}\}<m-2\},\quad
+ K_E^{(N)}=K_E^{(0)}\setminus O_N.
+\end{equation}
+Each $O_N$ is open, and $O_N\subset O_{N+1}$. Fix
+$x\in K_E^{(0)}$. For each of its strict anchors, the corresponding
+piece in the finite enumeration contains $x$, and the addition on
+that piece puts $x$ in an open enlarged core regardless of how small
+$\varepsilon$ was chosen. Only finitely many anchors are involved.
+Once those additions have occurred, only threshold-equality labels
+can remain undecided at $x$. By \cref{lem:local-flat} those are at
+most $m-8$, giving $x\in O_N$ at some finite $N$. The increasing open
+sets cover $K_E^{(0)}$; compactness gives a finite subcover; the
+largest index has $K_E^{(N)}=\varnothing$. Stop there. All subsequent
+updates only shrink the guard.
+\end{proof}
+
+\section{Regularization and restoration of the invariant}
+\label{sec:regularization}
+
+The true cuts of \cref{sec:minimizers-appendix} produce genuine smooth
+packets only on their regular parts. We must replace them by smooth
+regular walls while preserving the analytic data of
+\cref{def:invariant}.
+
+\subsection{Guarded approximation}
+
+Let $E$ be a post-radial packet with true cut $S$, singular set
+$\Sigma$, and guard $H_E^*$. Shielding has made $H_E^*$ missing from
+$\Sigma$. Fix a smooth cutoff $\chi$ equal to $1$ on a neighborhood of
+$H_E^*$, supported inside the packet away from $\Sigma$.
+
+\begin{lemma}[Guarded approximation]\label{lem:guarded-approx}
+The true cut, restricted to $\{\chi=1\}$, admits smooth regular
+walls $L$ with defining function $u\colon E\to\R$ satisfying
+$u>0$ on $q_E^{-1}(A_j)$ and $u<0$ on $q_E^{-1}(B_j)$ for every
+remaining color label $j$, and with $|u-\psi|<10^{-3}\psi$ on the
+guard, where $\psi$ is a fixed comparison function that vanishes on
+the true cut. The pair $(L,u)$ can be chosen compatible with all
+products in old ends.
+\end{lemma}
+
+\begin{proof}[Sketch]
+On compact pieces of $H_E^*$ smoothness of the cut gives a graphical
+description. Set $u$ to be the signed distance to $S_{\rm reg}$:
+\begin{equation}\label{eq:signed-distance}
+ u(x)=\pm\dist(x,S_{\rm reg})
+\end{equation}
+near $S_{\rm reg}$ with sign from the cut. This function is $C^{1,\alpha}$
+with $\alpha$ uniform; approximate by smooth functions via the
+$C^{1,\alpha}\to C^1$ smoothing operator $Tf$ of
+\cref{lem:constant-preservation} below. End compatibility comes from
+choosing approximation errors on the finite list of coface
+participants and using the finite-tolerance allocation of
+\cref{sec:packets-appendix}.
+\end{proof}
+
+\subsection{Constant preservation}
+
+\begin{lemma}[Constant-preserving smoothing]\label{lem:constant-preservation}
+A continuous scalar function on a packet can be approximated by smooth
+functions, with any prescribed positive value error, by operators that
+reproduce constants. For compatible input on a packet diagram, the
+approximations can be chosen compatible in all sufficiently far product
+ends of that diagram. If the input and all face copies used equal the
+same constant $c$, the result equals $c$ there exactly. The same
+assertion holds componentwise for a finite list of functions.
+\end{lemma}
+
+\begin{proof}
+Choose a locally finite coordinate cover, relatively compact smaller
+charts, and a smooth partition of unity $\{\psi_\alpha\}$ subordinate
+to the smaller charts. Extend each chart and average the function
+against a smooth kernel of integral one at chart-dependent scale. The
+local average sends $c$ to $c$. Blending from deeper faces upward with
+weights $w_i$ maintains both constants and exact face
+identities. Choose the finite tolerance union over the prescribed
+directed dependencies before applying the construction; every other
+entry has all its local inputs equal to the same constant, so
+smoothing error is zero for that entry.
+\end{proof}
+
+\subsection{Seam smoothing}
+
+\begin{lemma}[Seam smoothing]\label{lem:seam}
+The raw joined metrics admit smooth compatible metrics with arbitrarily
+small $C^0$ error, and their scalar forms converge to the raw forms
+quantitatively: on each joined packet and for every $\delta>0$ the
+smoothing can be chosen so that the absolute form error is at most
+$\delta\int(u^2+|\nabla u|^2)$ for every compact matching test, using
+the raw metric to measure the right side. The old warped-product
+structure and every sufficiently far old product end are preserved.
+The choices on a wall satisfy the requests of both incident sides at
+once.
+\end{lemma}
+
+\begin{proof}[Sketch]
+In a normal collar of a smooth wall, write the stabilized metric
+$ds^2+\beta_s$ for $s\le 0$. The raw joined metric is
+$ds^2+\beta_{\min(s,0)}$. Choose a smooth concave function $\Phi$
+equal to $t$ for $t\le-1$ and to $0$ for $t\ge1$, with
+$0\le\Phi'\le1$, and $\int\Phi''=-1=-\int|\Phi''|$. Substituting
+$\Phi(\cdot/w)$ for a narrow width $w>0$ produces a $C^\infty$ metric
+converging to the raw in the sense stated. The scalar curvature
+concentration at the corner is
+\[
+ \Scal(\Phi)\to\Scal(\text{raw})+\text{sign}\cdot\dd\mathcal H^{m-1}
+ \text{ measure at }\partial
+\]
+and integrating by parts against a smooth test transfers this
+boundary measure to the form inequality. Compatibility comes from
+choosing $\Phi$ with fixed plateaus in all product ends.
+\end{proof}
+
+\subsection{Restricted profiles and potentials}
+
+Recall from \cref{sec:packets-appendix} that the profile inequality is
+$2|\grad\mu_j|_{\rm new}\le a_r\mu_j^2+\Pi_j$ a.e.\ on the finite band.
+
+\begin{lemma}[Profile restriction]\label{lem:profile-restrict}
+After seam smoothing, profiles and cores can be restricted to the new
+packets so that the profile inequality is preserved, and potentials
+smoothly compatible with
+\[
+ (1+\eta_r)\widetilde\Pi_j
+ \le\Pi_j^{\rm new}\le(1+2\eta_r)\widetilde\Pi_j.
+\]
+The associated Schr\"odinger operator
+$L_A^0=-C\lap_{\rm old}+R_{\rm old}-V_A^*$ is form-bounded below on a
+neighborhood of the new required set by a positive multiple of
+$\|u\|_2^2$.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Locally Lipschitz functions with an a.e.\ gradient bound by a
+continuous function have the same local Lipschitz slope bound on
+hypersurfaces. Indeed convolve on a small ball, take the derivative
+bound on the shrinking ball, integrate along segments and pass to the
+limit. Composing with the split's smooth base-and-cylinder projection
+preserves both the profile and the core membership.
+
+For potentials: by \cref{lem:constant-preservation}, apply
+$(1+3\eta_r/2)\widetilde\Pi_j$ with smoothing error less than
+$\eta_rp_j^*/2$. When $\widetilde\Pi_j$ is a spatial constant $c_j$,
+the new value is exactly $(1+3\eta_r/2)c_j$. Then the profile
+inequality in the new metric follows from
+$2|\grad\mu_j|_{\rm new}\le(1+\eta_r)(a_r\mu_j^2+\widetilde\Pi_j)
+\le a_{r+1}\mu_j^2+\Pi_j^{\rm new}$.
+\end{proof}
+
+\subsection{Compatible corrections and positive supersolutions}
+
+\begin{lemma}[Correction]\label{lem:correction}
+There exists a smooth compatible nonnegative $K_{\rm ind}$, zero on a
+neighborhood of the new required set $D_A$, such that the operator
+$Q_A^0+K_{\rm ind}$ with
+\begin{equation}\label{eq:correction}
+ K_{\rm ind}=J\sin^2\vartheta+C|\nabla\vartheta|^2,\quad
+ J>-\inf W_A,
+\end{equation}
+is positive, more precisely has form gap $\gamma_A\ge\min\{e_0,
+J+\inf W_A\}$.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Set $W_A=R_{\rm old}-V_A^*$. Choose a smooth angle $\vartheta$ equal
+to $0$ near $D_A$ and $\pi/2$ outside a neighborhood of local
+positivity, with bounded derivatives and $\supp\cos\vartheta$ inside
+that neighborhood. Partition $\cos^2+\sin^2=1$: the gradient partition
+is exactly $C|\nabla\vartheta|^2u^2$, and the two parts split the
+form. Local positivity controls the cosine part; $W_A+J>0$ controls
+the sine part.
+\end{proof}
+
+\begin{lemma}[Resolvent]\label{lem:resolvent}
+The form $Q_A^0$ is coercive on $H^1$. There is a self-adjoint positive
+inverse $L_A^{-1}$ on $L^2$, with norm at most $C_{\rm op}$. On each
+post-radial packet the pair $(L_A, L_A^{-1})$ is positive.
+\end{lemma}
+
+\begin{proof}
+Combine $Q\ge g\|u\|_2^2$ with
+$Q\ge C\|\nabla u\|_2^2-\|W_-\|_\infty\|u\|_2^2$ to get coercivity.
+Then a self-adjoint inverse exists by the Lax-Milgram theorem. If
+$f\ge0$, testing $Lu=f$ with the negative part gives
+$Q(u_-)\le0$, so $u\ge0$.
+\end{proof}
+
+\begin{lemma}[Strict supersolution]\label{lem:supersolution}
+Let $R>0$ and $A$ a bounded measurable positive set. There exists
+$s_D\ge0$ smooth, bounded below, with $s_D=1$ on a nested smaller
+domain for $R$ large, and $L_A s_D\ge c>0$.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Fix two nested relatively compact coordinate domains in which the
+source is exactly $1$. Interior Schauder estimates and differentiation
+bound every derivative of $u_R$ on the smaller domain uniformly for
+$R\ge R_0$. A diagonal subsequence converges smoothly on compact
+subsets to a bounded positive solution $s$ of $Ls=1$.
+\end{proof}
+
+\subsection{Compatible positive approximations}
+
+\begin{lemma}[Compatible positive approximation]\label{lem:sol-approx}
+Fix the corrections of \cref{lem:correction} and let $s_A$ be the
+exact bounded solution $L_As_A=1$. There exist smooth compatible
+functions $v_A>0$ with $L_Av_A\ge1/2$ on every packet. They have
+positive infimum and bounded derivatives packetwise.
+\end{lemma}
+
+\begin{proof}[Sketch]
+Use the end-decay: on an exact elementary collar $B\times(T,\infty)$
+the difference $w=s_A-s_B$ satisfies
+$|s_A-s_B|(x,t)\le C e^{-\alpha t}s_B(x)$ for $t<T$. Construct $v_A$
+from deeper faces upward: keep $s_A$ in the compact part and use
+packet weights to blend to $v_B$; move the starts until
+$\|s_A-s_B\|_{C^2}<\varepsilon/4$ on all participating collars. The
+remaining $v_B-s_B$ is paid by its allocated tolerance, not by moving
+the start. Start beyond all compatibility thresholds so that copies
+agree. The compact data give bounded higher derivatives. Choose the
+tolerance $\tau_A$ small enough that $L_Av_A\ge 1-M_A\tau_A\ge3/4\ge1/2$.
+\end{proof}
+
+\subsection{The scalar-identity step}
+
+\begin{proposition}[The full invariant step]\label{prop:full-step}
+Assume the stage-$r$ invariant and the conclusion of
+\cref{prop:global-shielding}. For every nonempty parent packet of base
+dimension at least two, processing $j_0$ produces the compatible
+smooth split packets of \cref{def:packet}, with the required forced
+signs and continuous projection maps. There are smooth compatible old
+metrics and $k=399$ new torus factors on every packet such that the
+profiles, cores, potentials, and scalar curvature satisfy the
+stage-$(r+1)$ invariant. This includes a possible one-dimensional
+output, on which the scalar lower bound is global.
+\end{proposition}
+
+\begin{proof}[Sketch]
+Apply \cref{lem:guarded-approx,lem:seam,lem:profile-restrict} for the
+smooth base metrics and the profile data, and
+\cref{lem:correction,lem:resolvent,lem:supersolution,lem:sol-approx} for
+$v_A$. Append $k=399$ circle variables, each with length function
+$v_A^{2/(k+1)}$. The warped-product identity is
+\[
+ R_{\rm new}=R_{\rm old}-\frac{4k}{k+1}\frac{\lap_{\rm old}v_A}{v_A}.
+\]
+Indeed a common scale $f$ contributes
+$-2kf^{-1}\lap_{\rm old}f-k(k-1)f^{-2}|df|^2$; substitution of
+$f=v_A^{2/(k+1)}$ cancels the separate $|dv_A|^2$ term. Here $k$
+counts only the newly appended circle factors; unit factors used
+earlier to compare old lists have zero logarithmic derivative and leave
+both $\lap_{\rm old}$ and the coefficient unchanged. Since
+$4k/(k+1)=C$, \cref{lem:profile-restrict,lem:supersolution} give
+\[
+ R_{\rm new}=V_A^*-K_A+\frac{L_A v_A}{v_A}\ge V_A^*
+ \text{ on }D_A.
+\]
+Here $K_A=0$ on a neighborhood of $D_A$. Adding these factors changes
+no base distances or profile gradients. The new factors are positive,
+bounded above and away from zero, and exactly compatible. The same
+number is appended at every status of the stage, so all end identities
+compare the same list of factors. This proves the analytic invariant,
+including when the new required threshold is zero.
+\end{proof}
+
+\begin{thebibliography}{99}
+
+\bibitem{agmon1982}
+Agmon, S. \emph{Lectures on exponential decay of solutions of second-order
+elliptic equations}. Mathematical Notes 29, Princeton Univ.\ Press, 1982.
+
+\bibitem{allard1972}
+Allard, W.~K. On the first variation of a varifold.
+\emph{Ann.\ of Math.} \textbf{95} (1972), 417--491.
+
+\bibitem{antonelli2026Volume}
+Antonelli, G. Universal volume growth bounds from positive intermediate
+curvature. arXiv:2608.14507v2, 2026.
+
+\bibitem{biZhu2026}
+Bi, X., Zhu, C. Singular scalar-curvature descent for enlargeability and
+cubical-width inequalities. Preprint, 2026.
+
+\bibitem{bolotov2003}
+Bolotov, D. Macroscopic dimension of the universal cover of a
+three-manifold. Preprint, 2003.
+
+\bibitem{bolotovDranishnikov2010}
+Bolotov, D., Dranishnikov, A. On Gromov's scalar curvature conjecture.
+\emph{Proc.\ Amer.\ Math.\ Soc.} \textbf{138} (2010), 1237--1243.
+
+\bibitem{bolotovDranishnikov2016}
+Bolotov, D., Dranishnikov, A. On Gromov's conjecture for totally non-spin
+manifolds. \emph{J.\ Topol.\ Anal.} \textbf{8} (2016), 571--587.
+
+\bibitem{chodoshLi}
+Chodosh, O., Li, C. Generalized soap bubbles and the topology of manifolds
+with positive scalar curvature. Preprint, 2020.
+
+\bibitem{daherDranishnikov2019}
+Daher, M., Dranishnikov, A. On macroscopic dimension of non-spin
+four-manifolds. arXiv:1904.00846v1, 2019.
+
+\bibitem{deGiorgi1954}
+De Giorgi, E. Su una teoria generale della misura $(r-1)$-dimensionale in
+uno spazio ad $r$ dimensioni. \emph{Ann.\ Mat.\ Pura Appl.} \textbf{36}
+(1954), 191--213.
+
+\bibitem{deGiorgi1955}
+De Giorgi, E. Nuovi teoremi relativi alle misure $(r-1)$-dimensionali in
+uno spazio ad $r$ dimensioni. \emph{Ricerche Mat.} \textbf{4} (1955),
+95--113.
+
+\bibitem{dranishnikov2014}
+Dranishnikov, A. Macroscopic dimension and its applications.
+Preprint, 2014.
+
+\bibitem{federerFleming1960}
+Federer, H., Fleming, W.~H. Normal and integral currents.
+\emph{Ann.\ of Math.} \textbf{72} (1960), 458--520.
+
+\bibitem{fischerColbrieSchoen1980}
+Fischer-Colbrie, D., Schoen, R. The structure of complete stable minimal
+surfaces in 3-manifolds of non-negative scalar curvature.
+\emph{Comm.\ Pure Appl.\ Math.} \textbf{33} (1980), 199--211.
+
+\bibitem{gromov1983Filling}
+Gromov, M. Filling Riemannian manifolds.
+\emph{J.\ Diff.\ Geom.} \textbf{18} (1983), 1--147.
+
+\bibitem{gromov1996}
+Gromov, M. Positive curvature, macroscopic dimension, spectral gaps and
+higher signatures. In \emph{Functional Analysis on the Eve of the 21st
+Century}, vol.~II, Birkh\"auser, 1996, 1--213.
+
+\bibitem{gromov2017Dozen}
+Gromov, M. A dozen problems, questions and conjectures about positive
+scalar curvature. Author-hosted preprint, 2017.
+
+\bibitem{gromov2018Metric}
+Gromov, M. Metric inequalities with scalar curvature.
+\emph{Geom.\ Funct.\ Anal.} \textbf{28} (2018), 645--726.
+
+\bibitem{gromov2020Aspherical}
+Gromov, M. No aspherical four-manifold admits a metric of positive scalar
+curvature. In \emph{Perspectives in Scalar Curvature}, World Scientific,
+2020.
+
+\bibitem{gromovLawson1983}
+Gromov, M., Lawson, H.~B. Positive scalar curvature and the Dirac operator
+on complete Riemannian manifolds. \emph{Inst.\ Hautes \'Etudes Sci.\ Publ.\
+Math.} \textbf{58} (1983), 83--196.
+
+\bibitem{kumarSen2026Width}
+Kumar, A., Sen, B. Urysohn width and macroscopic scalar curvature.
+arXiv:2601.14669v2, 2026.
+
+\bibitem{liokumovichMaximo2023}
+Liokumovich, Y., Maximo, D. Waists of Morse functions on positive scalar
+curvature 3-manifolds. Preprint, 2023.
+
+\bibitem{liokumovichWang2023}
+Liokumovich, Y., Wang, Z. On the waist and width inequality in complete
+3-manifolds with positive scalar curvature. arXiv:2308.04044v1, 2023.
+
+\bibitem{lohkamp2022SplittingsII}
+Lohkamp, J. Splittings of manifolds and positive scalar curvature, II.
+Preprint, 2022.
+
+\bibitem{massari1975}
+Massari, U. Esistenza e regolarit\`a delli frontiere di area minima con
+ostacolo. \emph{Ann.\ Mat.\ Pura Appl.} \textbf{105} (1975), 271--298.
+
+\bibitem{massariPepe1975}
+Massari, U., Pepe, L. Su una impostazione geometrica della teoria
+variazionale. \emph{Boll.\ Un.\ Mat.\ Ital.} \textbf{11} (1975), 87--102.
+
+\bibitem{miao2002Corners}
+Miao, P. Positive mass and corner smoothing for smooth metrics.
+\emph{Comm.\ Anal.\ Geom.} \textbf{10} (2002), 441--467.
+
+\bibitem{michaelSimon1973}
+Michael, J.~H., Simon, L.~M. Sobolev and mean-value inequalities on
+generalized submanifolds of $\mathbb R^n$.
+\emph{Comm.\ Pure Appl.\ Math.} \textbf{26} (1973), 361--379.
+
+\bibitem{nabutovskyRotmanSabourau2021}
+Nabutovsky, A., Rotman, R., Sabourau, S. Sweepouts of closed Riemannian
+manifolds. \emph{Geom.\ Funct.\ Anal.} \textbf{31} (2021), 721--766.
+
+\bibitem{nash1956}
+Nash, J. The imbedding problem for Riemannian manifolds.
+\emph{Ann.\ of Math.} \textbf{63} (1956), 20--63.
+
+\bibitem{openai2026RationalInessentiality}
+OpenAI. Positive scalar curvature forces rational inessentiality.
+OpenAI Math Release preprint OAI:2026, September 23, 2026.
+
+\bibitem{schoenYau1979Structure}
+Schoen, R., Yau, S.-T. On the structure of manifolds with positive scalar
+curvature. \emph{Manuscripta Math.} \textbf{28} (1979), 159--183.
+
+\bibitem{simonGMT}
+Simon, L. \emph{Lectures on Geometric Measure Theory}. Proc.\ Centre
+Math.\ Anal.\ Austral.\ Nat.\ Univ., vol.~3, 1983.
+
+\bibitem{simonPDE}
+Simon, L. \emph{Schauder estimates by scaling}. Notes in PDE.
+
+\end{thebibliography}
+
+\end{document}