diff 56bc728..f6bf760 positive_scalar_width_v2.txt
diff --git a/positive_scalar_width_v2.txt b/positive_scalar_width_v2.txt
index d72dd6c..9c99a25 100644
--- a/positive_scalar_width_v2.txt
+++ b/positive_scalar_width_v2.txt
@@ -55,7 +55,7 @@ Let (M,g) be a connected complete smooth Riemannian n-manifold,
 nge 4, with scalar curvature Scal_gge 1 and no boundary.
 We prove the quantitative form of Gromov's macroscopic-dimension
 conjecture in every dimension nge 4. There is a constant C_n
-depending only on n such that M admits a continuous map fcolon Mto K
+depending only on n such that M admits a continuous map f: Mto K
 to a simplicial complex K of dimension at most n-2, whose entire
 fibers have g-diameter at most C_n. Equivalently, the Urysohn
 (n-2)-width satisfies UW_{n-2}(M,g)le C_n.
@@ -73,7 +73,7 @@ at the price of a mild drift loss. (ii) Cut each label pair apart by a
 minimizing hypersurface, handling high-dimensional singularities by
 enlarging the pressure profiles of the remaining labels; a warped-circle
 trick restores scalar control on each cut packet. (iii) Assemble
-coordinates t_icolon Mto[0,1] that are 1 inside label i and
+coordinates t_i: Mto[0,1] that are 1 inside label i and
 0 far outside it; the walls cannot all pass through the same point,
 so at most n-2 coordinates are fractional, and any two points in a
 common fiber lie in a common ball of radius 2D.
@@ -102,7 +102,7 @@ of the entire fiber in X. Empty fibers are omitted from the sup.
 For every integer nge4 there is a finite constant C_n, depending
 only on n, with the following property. Every connected complete
 smooth Riemannian n-manifold (M,g) without boundary and with
-Scal_gge1 admits a continuous map fcolon Mto K to a simplicial
+Scal_gge1 admits a continuous map f: Mto K to a simplicial
 complex of dimension at most n-2 such that
 [
  diam_g f^{-1}(y)le C_n quadfor every  yin K.
@@ -220,7 +220,7 @@ smooth function t such that for every i the h-distance between
 A_i and B_i exceeds a prescribed L_i, while a certain drift
 scalar remains bounded below:
 
- mathcal D(h,t):=calD(h,t):=Scal_h+2lap_h t-|dd t|_h^2getfrac12.
+ D(h,t):=calD(h,t):=Scal_h+2lap_h t-|dd t|_h^2getfrac12.
 
 Only finitely many labels require any particular finite width L_i;
 labels with larger L_i are ``spread out'' over more rounds. Summing
@@ -231,7 +231,7 @@ medskipnoindent
 Step 2 (cutting). For each label i, find a hypersurface
 W_isubset M separating the q-preimage of A_i from the
 q-preimage of B_i, together with a modification of metric and
-function that keeps mathcal DcalDgefrac12 on the resulting pieces.
+function that keeps D on the resulting pieces.
 Singularities of W_i in dimensions 8 and up force a nontrivial
 shielding step: the pressure profiles of the remaining labels
 are enlarged in a thin annular shell near each singular point so that
@@ -242,7 +242,7 @@ identity restores positive scalar on each resulting packet by paying
 through 399 trivializing circle factors.
 
 medskipnoindent
-Step 3 (assembly). Choose coordinates t_icolon Mto[0,1]
+Step 3 (assembly). Choose coordinates t_i: Mto[0,1]
 that equal 1 on q^{-1}(A_i), 0 on q^{-1}(B_i), and transition
 only inside a small neighbourhood of W_i. The key combinatorial
 observation is that no n-1 of the W_i can share a common point:
@@ -281,7 +281,7 @@ where u is a smooth height function, phi_u and beta_u are
 appropriate scalar functions of the gradient length s=|dd u|_h, and
 the change is engineered so that the drift scalar
 [
- mathcal D(h,t):=calD(h,t):=Scal_h+2lap_h t-|dd t|_h^2
+ D(h,t):=calD(h,t):=Scal_h+2lap_h t-|dd t|_h^2
 ]
 strictly increases. The point of the extra function t is that the drift
 lap_h t-|dd t|_h^2 is what the warped-product construction in
@@ -297,7 +297,7 @@ EtimesT^k. Write P=sum_alpha p_alpha. Then
  Scal_{widehatwidehat h}h=Scal_h-2lap_h P-|dd P|_h^2-sum_{alpha=1}^k|dd p_alpha|_h^2.
 
 Equivalently
-Scal_{widehatwidehat h}h=mathcal D(h,P)-calD(h,P)-sum_alpha|dd p_alpha|_h^2
+Scal_{widehatwidehat h}h=D(h,P)-calD(h,P)-sum_alpha|dd p_alpha|_h^2
 when t=P.
 
 Proof. [Proof of (eq:warp-identity)]
@@ -315,7 +315,7 @@ Summing twice over orthonormal 2-planes gives (eq:warp-identity).
 
 ## The graph deformation
 
-Fix s_0=10^{-2} and a smooth nondecreasing rhocolon[0,∞)to[0,1]
+Fix s_0=10^{-2} and a smooth nondecreasing rho:[0,∞)to[0,1]
 with
 [
  rho=0 on [0,s_0], rho=1 on [5s_0,∞),
@@ -353,7 +353,7 @@ h+dd u^2+dd z^2 (with z a formal vertical coordinate) with a
 conformal factor depending only on s=|dd u|_h. On such a graph the
 various scalar-curvature terms reorganize in a computationally useful way.
 The drift t_u=t-beta is tuned so that the drift scalar
-mathcal D(h_u,t_u)calD(h_u,t_u) exceeds mathcal D(h,t)+(t_u^2-t^2)calD(h,t)+(t_u^2-t^2) by a
+D(h_u,t_u)calD(h_u,t_u) exceeds D(h,t)+(t_u^2-t^2)calD(h,t)+(t_u^2-t^2) by a
 nonnegative amount, up to the small errors controlled in cref{thm:stretch}.
 
 The key structural input is the following identity. In local normal
@@ -368,7 +368,7 @@ Let E be a smooth manifold, h a Riemannian metric, u a smooth
 function with s=|dd u|_h>0, tge T a smooth function, and define
 h_u, t_u by (eq:raw-deform). Then
 
- mathcal D(h_u,t_u)-calD(h_u,t_u)-mathcal D(h,t)calD(h,t)
+ D(h_u,t_u)-calD(h_u,t_u)-D(h,t)calD(h,t)
  =theta,E(mathrm J,H,F,rmJ,H,F,xi,t)+O(theta E_{rm cutoff}),
 
 where E is a function of the second fundamental form, the ``pressure''
@@ -379,7 +379,7 @@ the same form for a suitably reduced E.
 
 The exact form of E will be given in the proof of cref{thm:stretch}
 below. Its crucial feature: on a favourable branch of the pressure F,
-E is bounded below by a positive multiple of s cdot F_x, and this
+E is bounded below by a positive multiple of s · F_x, and this
 drives both the scalar increase and the distance enlargement.
 
 We now state the pressure law which supplies the function F
@@ -400,7 +400,7 @@ not too strong. The exact requirements are the following.
 For every choice of A_0,P_0,eps,b_0>0 there exist 0<S_0le1, Tge1,
 and a smooth function
 [
- Fcolon(-S_0,S_0)times[T,∞)toR
+ F:(-S_0,S_0)times[T,∞)toR
 ]
 which is odd in the first variable, has F_xi>0, and satisfies for all
 (xi,t)in(-S_0,S_0)times[T,∞):
@@ -429,7 +429,7 @@ law lives in one dimension above R, so no geometric input is
 required.
 
 Proof. [Proof of cref{thm:pressure}]
-Let k>0 and a positive smooth function gcolon[0,∞)to(0,∞)
+Let k>0 and a positive smooth function g:[0,∞)to(0,∞)
 be auxiliary data. For f>0 and t>0 set
 
  X(f,t)=frac1karctanfrac{f^{1/3}}{g(y)},
@@ -440,7 +440,7 @@ Differentiation at fixed f and at fixed t, respectively, gives
  fX_t=-(g'(y))/(k(1+g(y)^2/q)),
  X_f=(g(y)+2yg'(y))/(3kq^2(1+g(y)^2/q)).
 
-Thus invertibility of X(cdot,t) in f requires the quantity
+Thus invertibility of X(·,t) in f requires the quantity
 A(y):=g(y)+2yg'(y)>0 for all yge0. For the inverse F we have
 
  F_xi=1/X_f,
@@ -510,7 +510,7 @@ and hence F_xileeps F^2le b_0 t^2+eps F^2.
 
 Pole limits. As fto0^+: yto∞, g(y)=y, so
 X(f,t)to0. As fto∞: yto0, g(y)to g(0)>0, so
-X(f,t)topi/(2k)=:S_0le1. Hence X(cdot,t) maps (0,∞)
+X(f,t)topi/(2k)=:S_0le1. Hence X(·,t) maps (0,∞)
 bijectively to (0,S_0), and its inverse F extends oddly to
 (-S_0,S_0) and is smooth at xi=0 because near f=0 the formula
 reduces to X=(1/k)arctan(f/t), F=ttan(kxi). Proper pole limits
@@ -544,7 +544,7 @@ Bsubset M closed, with dist_{h_0}(A,B)ge W. For every
 0<d<delta there exist smooth h'ge h and t'ge t, with
 changes compactly supported in {x:dist_{h_0}(A,x)<W}, such that
 
- mathcal D(h',t')&calD(h',t')&gemathcal D(h,t)+(t'^2-t^2)calD(h,t)+(t'^2-t^2)notag
+ D(h',t')&calD(h',t')&geD(h,t)+(t'^2-t^2)calD(h,t)+(t'^2-t^2)notag
  &-delta(tr_h h_0-tr_{h'}h_0)t'^2-d t'^2,
  
  dist_{h'}(A,B)&ge L_*W.
@@ -583,12 +583,12 @@ N and extend h,t to N; work entirely in N from now on.
 Step B (graph equation). For tauin[0,1] consider the
 equation
 
- Div_hmathcal A(calA(dd u)-dd t(mathcal A(calA(dd u))
+ Div_hA( u)-dd t(A( u))
  =J(|dd u|_h)F((u-taupsi)/(eta),t),
 
-where mathcal A(p)=calA(p)=sqrtmu(1+|p|_h^2)^{-1/2}p^sharp and
+where A(p)=+|p|_h^2)^{-1/2}p^sharp and
 J(s)=√(theta+a^2s_0^2), with mu,theta from
-(eq:switch), and F from cref{thm:pressure}. Note mathcal AcalA
+(eq:switch), and F from cref{thm:pressure}. Note A
 and J are smooth at p=0 because mu(0)=a^2 constants.
 
 For each fixed positive floor r>0 and tau=1, this equation has
@@ -622,7 +622,7 @@ Step C (raw scalar estimate). At every point of nonzero slope,
 the raw deformation h_u=h+phi_udd u^2, t_u=t-beta satisfies,
 up to constants that are paid by the small parameters a,d,
 
- mathcal D(h_u,t_u)calD(h_u,t_u)gemathcal D(h,t)+(t_u^2-t^2)calD(h,t)+(t_u^2-t^2)
+ D(h_u,t_u)calD(h_u,t_u)geD(h,t)+(t_u^2-t^2)calD(h,t)+(t_u^2-t^2)
  -delta(tr_h h_0-tr_{h_u}h_0)t_u^2-(d)/(2)t^2.
 
 This is the heart of cref{thm:stretch} and is proved in
@@ -661,7 +661,7 @@ non-linear derivative budget in t.
 Fix A_0,P_0,eps,b_0>0. There exist 0<S_0le 1, Tge 1, and a
 smooth function
 [
- Fcolon(-S_0,S_0)times[T,∞)→R
+ F:(-S_0,S_0)times[T,∞)→R
 ]
 which is odd in x, has F_x>0, and satisfies everywhere on its
 domain
@@ -690,10 +690,10 @@ deformation parameter is chosen.
 In cref{sec:local-step} the unknown is a height function u on a
 closed manifold N, solving the elliptic equation
 
- Div_hmathcal A(calA(dd u)-dd t(mathcal A(calA(dd u))
+ Div_hA( u)-dd t(A( u))
  =J(|dd u|_h),F!((u-taupsi)/(eta),t).
 
-Here mathcal AcalA is an operator built from an auxiliary ``slope switch''
+Here A is an operator built from an auxiliary ``slope switch''
 and J>0 is a scalar factor. The argument of F lives in |x|<S_0.
 
 The inequality F_xge A_0t makes F very steep in x. A
@@ -715,23 +715,23 @@ quadratic budget F_xle b_0t^2+eps F^2, closes the analysis in the
 transition region where neither of the two branches is decisive.
 
 The construction is by an inverse coordinate: instead of F
-directly we prescribe X(cdot,t)=F(cdot,t)^{-1} and read the
+directly we prescribe X(·,t)=F(·,t)^{-1} and read the
 derivative inequalities from the inverse-function formulas. Almost
 all of the work is choosing an auxiliary g so that both branches
 of the second inequality hold.
 
 ## The inverse construction
 
-Let k>0 and gcolon[0,∞)to(0,∞) be smooth positive
+Let k>0 and g:[0,∞)to(0,∞) be smooth positive
 functions to be fixed. For a pressure value f>0 and a drift t>0
 define a height
 
  X(f,t)=frac1karctan!(frac{f^{1/3}}{g(y)}),
   y=frac{t}{f^{2/3}}.
 
-We will see that for fixed t the map X(cdot,t) is strictly
+We will see that for fixed t the map X(·,t) is strictly
 increasing in f, with limit 0 as fto 0 and limit S_0=pi/(2k)
-as fto∞. Hence F(cdot,t)=X(cdot,t)^{-1} is well defined
+as fto∞. Hence F(·,t)=X(·,t)^{-1} is well defined
 and smooth on (0,S_0); extending oddly to (-S_0,0) and setting
 F(0,t)=0 gives the full pressure.
 
@@ -746,7 +746,7 @@ region uses the quadratic budget instead.
 
 ## Construction of the auxiliary function g
 
-Let rhocolon[1,2]to[0,∞) be a smooth nonnegative density
+Let rho:[1,2]to[0,∞) be a smooth nonnegative density
 supported in [1,2], positive in (1,2), vanishing to infinite
 order at both endpoints, with int_1^2rho(r)dd r=1. For example
 [
@@ -815,7 +815,7 @@ By cref{eq:X-def},
  A(y)=g(y)+2y g'(y),
 
 where q=f^{2/3}, y=t/q. By cref{eq:g-inequalities} we have
-Age g/2>0, hence X_f>0. Set F(cdot,t)=X(cdot,t)^{-1}. Then
+Age g/2>0, hence X_f>0. Set F(·,t)=X(·,t)^{-1}. Then
 
  F_x=frac1{X_f}, F_t=-(X_t)/(X_f),
 
@@ -886,7 +886,7 @@ so F_x=1/X_fleeps F^2le b_0t^2+eps F^2.
 
 ## Pole limits and uniformity
 
-By construction F(cdot,t)=(X(cdot,t))^{-1} gives the
+By construction F(·,t)=(X(·,t))^{-1} gives the
 limits at pm S_0: as fto∞, X(f,t)topi/(2k)=S_0, hence
 F(x,t)to∞ as xto S_0; oddness gives the limit at -S_0.
 Uniformity follows from: for any compact Isubset[T,∞) and
@@ -926,10 +926,10 @@ identity for a foliation gives
 
 where dd_gamma and lap_gamma are taken on the level set with
 metric gamma_q. Substituting (eq:gauss-sc), (eq:lap-foliation)
-into the definition of mathcal DcalD gives:
+into the definition of D gives:
 
  
-  mathcal D(h,t)&=-|calD(h,t)&=-|mathrm J|^2-S^2-2rmJ|^2-S^2-2,mathrm eS+rmeS+Scal_gamma
+  D(h,t)&=-|calD(h,t)&=-|mathrm J|^2-S^2-2rmJ|^2-S^2-2,mathrm eS+rmeS+Scal_gamma
     +2lap_gamma t-|dd_gamma t|^2
   &-2(lap_gamma v)/(v)
     +2<dd_gammalog v,dd_gamma t>,
@@ -975,7 +975,7 @@ Substituting S=M+K and S'=lM+K/l into the normal terms
 accounting for the change vto v/l in -2lap_gamma v/v and the
 change tto t-beta in +2lap_gamma t-|dd_gamma t|^2 gives
 
- mathcal D(h_u,t_u)-calD(h_u,t_u)-mathcal D(h,t)calD(h,t)getheta E,
+ D(h_u,t_u)-calD(h_u,t_u)-D(h,t)calD(h,t)getheta E,
   E=|mathrm J|^2+M^2+K^2/l^2-2MK+2rmJ|^2+M^2+K^2/l^2-2MK+2,mathrm eM.rmeM.
 
 
@@ -992,10 +992,10 @@ and mathrm et=H-M-K,rmet=H-M-K, we have
 [
  mathrm eM=-mKM+rmeM=-mKM+chi(F_t,mathrm et+F_xrmet+F_x,mathrm ermexi).
 ]
-Completing H and K squares in E gives Ege mathcal B,calB, where
+Completing H and K squares in E gives Ege B, where
 
  
-  mathcal B&=calB&=chi^2{[1-l^2(1+m)^2]F^2-2[1+l^2(1+m)]FF_t-nF_t^2}
+  B&=calB&=chi^2{[1-l^2(1+m)^2]F^2-2[1+l^2(1+m)]FF_t-nF_t^2}
   &+2chi F_x,mathrm ermexi,
  
 
@@ -1003,7 +1003,7 @@ with all pressure terms evaluated at (xi,t). An exact verification,
 useful for tracing every sign, is
 
  
-  E-mathcal B&=(|calB&=(|mathrm J|^2-(H^2)/(n-1))rmJ|^2-(H^2)/(n-1))
+  E-B&=(|calB&=(|mathrm J|^2-(H^2)/(n-1))rmJ|^2-(H^2)/(n-1))
    +((H+(n-1)chi F_t)^2)/(n-1)
   &+(frac K l-lchi[(1+m)F+F_t])^2+thetachi^2F_t^2ge0.
  
@@ -1013,15 +1013,15 @@ traceless part of the second fundamental form.
 
 We now split into the three slope regimes used in the proof.
 
-Regime (L): sge s_0. Write mathcal CcalC for the expression in
+Regime (L): sge s_0. Write C for the expression in
 braces in (eq:stretch-B). The coefficient of F^2 is nonnegative;
 also 1le1+l^2(1+m)le2. From the pressure-law estimates:
  If FF_tge0 then F_t^2leeps|F F_t| and
-      mathcal CcalCge-(4+neps)FF_tge-5eps F_x.
+      C-(4+neps)FF_tge-5eps F_x.
  If FF_t<0 then by the same inequality
-      mathcal CcalCge(2-neps)|FF_t|ge|FF_t|.
+      C-neps)|FF_t|ge|FF_t|.
  On the favourable branch -FF_tge P_0 F_x, so
-      mathcal CcalCge P_0 F_x.
+      C P_0 F_x.
 
 
 Where etane1 we have psi=0 and therefore
@@ -1046,8 +1046,8 @@ and the beta-budget
 tge1) closes the inequality (eq:stretch-raw) in this regime.
 
 Regime (M): 0<s<s_0. Since mle-frac12, the first
-coefficient in mathcal CcalC is at least 3/4. Using |F_t|leeps|F|
-gives mathcal CcalCge(3/4-4eps-neps^2)F^2ge F^2/2. Where eta=1,
+coefficient in C is at least 3/4. Using |F_t|leeps|F|
+gives C/4-4eps-neps^2)F^2ge F^2/2. Where eta=1,
 we have mathrm ermexi/chige-1. Elsewhere a negative mathrm ermexi
 requires sle|ddeta|_h, and then
 |mathrm ermexi|/chile|ddeta|_h s/(s_0eta)le|ddeta|_h^2/(s_0eta)le C_1
@@ -1086,10 +1086,10 @@ against the cutoff output).
 
 For a metric h and a smooth function t put
 
- mathcal D(h,t)=calD(h,t)=Scal_h+2lap_h t-|dd t|_h^2.
+ D(h,t)=calD(h,t)=Scal_h+2lap_h t-|dd t|_h^2.
 
 The next theorem enlarges the distance from a compact set to a fixed
-closed set while preserving a quadratic reserve in mathcal D.calD. The
+closed set while preserving a quadratic reserve in D. The
 error is a trace decrement, which will telescope over the many cuts of
 cref{sec:rounds}, plus an arbitrarily small quadratic loss d.
 
@@ -1102,10 +1102,10 @@ Let A be a nonempty compact set and B a nonempty closed set with
 dist_{h_0}(A,B)ge W. For every 0<d<delta there are smooth
 h'ge h and t'ge t such that
 
- mathcal D(h',t')calD(h',t')ge mathcal D(h,t)+(t'^2-t^2)calD(h,t)+(t'^2-t^2)
+ D(h',t')calD(h',t')ge D(h,t)+(t'^2-t^2)calD(h,t)+(t'^2-t^2)
  -delta(tr_hh_0-tr_{h'}h_0)t'^2-dt'^2,
 
-the changes are compactly supported in {dist_{h_0}(A,cdot)<W},
+the changes are compactly supported in {dist_{h_0}(A,·)<W},
 and
 
  dist_{h'}(A,B)ge L_*W.
@@ -1132,13 +1132,13 @@ h_u, t_u for a provisional height u.
 (iii) Show u_rto 0 in C^k_{rm loc} on a fixed region where the
 positive floor eta=r is constant (cref{lem:locality}).
 (iv) Compute the raw scalar estimate
-mathcal D(h_u,t_u)-calD(h_u,t_u)-mathcal D(h,t)calD(h,t)ge (t_u^2-t^2)-delta(tr_h h_0-tr_{h_u}h_0)t_u^2 on a neighbourhood of A.
+D(h_u,t_u)-calD(h_u,t_u)-D(h,t)calD(h,t)ge (t_u^2-t^2)-delta(tr_h h_0-tr_{h_u}h_0)t_u^2 on a neighbourhood of A.
 (v) Cut off the raw metric to have compact support and check the
 distance (eq:step-distance) via a length-variation argument.
 
 ## The slope switch
 
-Fix s_0=10^{-2} and a smooth nondecreasing rhocolon[0,∞)to[0,1]
+Fix s_0=10^{-2} and a smooth nondecreasing rho:[0,∞)to[0,1]
 with
 [
  rho=0 on [0,s_0],
@@ -1167,7 +1167,7 @@ bounds (elementary from the definition) are used throughout:
 
 For tge1 we also have
 
- ((t-beta)^2-t^2)/(theta)le 4(1+s)tqquad(s>0).
+ ((t-beta)^2-t^2)/(theta)le 4(1+s)t (s>0).
 
 Indeed writing b_*=-beta: if thetale 1/2 then b_*letheta and
 the left side is at most 3t; if theta>1/2 then
@@ -1246,14 +1246,14 @@ estimates happen on this compact N.
 
 For a covector p with s=|p|_h set
 [
- mathcal A(p)=calA(p)=frac{sqrtmu}{√(1+s^2)},p^sharp,
+ A(p)={sqrtmu}{√(1+s^2)},p^sharp,
   J(s)=√(theta+a^2s_0^2).
 ]
 Both are smooth at p=0, with tangential eigenvalue sqrttheta/s and
 radial eigenvalue (sqrttheta)_s, both positive and both limiting to
 a at the origin. For tauin[0,1] consider
 
- Div_hmathcal A(calA(dd u)-dd t(mathcal A(calA(dd u))
+ Div_hA( u)-dd t(A( u))
  =J(|dd u|_h),F!((u-taupsi)/(eta),t).
 
 The pressure F is evaluated only where |(u-taupsi)/eta|<S_0.
@@ -1284,7 +1284,7 @@ downward unit normal of the graph in (N,h)timesR. Extend t and
 psi constantly in the vertical direction. With
 X=-grad t, K=-∂_z, the equation reads
 H+< X,nu>=p(x,z,w) for a specific pressure p. The
-Jacobi identity mathcal Lw=-p_z,calLw=-p_z, applied at the minimum of w, and
+Jacobi identity Lw=-p_z,calLw=-p_z, applied at the minimum of w, and
 the exact coefficient bounds from cref{thm:pressure} give
 [
  (A_0T)/(sqrt2,eta)le (C)/(eta)w,
@@ -1337,7 +1337,7 @@ u=u_r.
 [Raw scalar estimate]
 On the original neighbourhood {r_A<1.1W} the raw output satisfies
 
- mathcal D(h_u,t_u)calD(h_u,t_u)ge mathcal D(h,t)+(t_u^2-t^2)calD(h,t)+(t_u^2-t^2)
+ D(h_u,t_u)calD(h_u,t_u)ge D(h,t)+(t_u^2-t^2)calD(h,t)+(t_u^2-t^2)
  -delta(tr_hh_0-tr_{h_u}h_0)t_u^2-(d)/(2)t^2.
 
 
@@ -1348,7 +1348,7 @@ coordinate. Write h=v^2dd q^2+gamma_q with v=1/s, e=v^{-1}∂_q,
 mathrm J=rmJ=tfrac1{2v}∂_qgamma_q, H=trmathrm J.rmJ. Set
 S=H-et. The Gauss equation and normal variation of H give
 [
- mathcal D(h,t)=-|calD(h,t)=-|mathrm J|^2-S^2-2eSrmJ|^2-S^2-2eS
+ D(h,t)=-|calD(h,t)=-|mathrm J|^2-S^2-2eSrmJ|^2-S^2-2eS
  +Scal_{gamma_q}+2lap_{gamma_q}t-|dd_{gamma_q}t|^2
  -2frac{lap_{gamma_q}v}{v}
  +2<dd_{gamma_q}log v,dd_{gamma_q}t>.
@@ -1365,32 +1365,32 @@ with c_beta=-sbeta_sin[0,2].
 The divergence equation can be written S+elogsqrttheta=chi F(xi,t)
 with xi=(u-psi)/eta. Define M=chi F and K=(l^2/theta)ebeta;
 then S=M+K. For the new metric, e'=le, mathrm J'=lrmJ'=lmathrm J,rmJ, and
-S'=lM+K/l. Substitution in the scalar formula for mathcal D(h_u,t_u)calD(h_u,t_u)
+S'=lM+K/l. Substitution in the scalar formula for D(h_u,t_u)calD(h_u,t_u)
 gives
 
- mathcal D(h_u,t_u)-calD(h_u,t_u)-mathcal D(h,t)calD(h,t)getheta E,
+ D(h_u,t_u)-calD(h_u,t_u)-D(h,t)calD(h,t)getheta E,
  E=|mathrm J|^2+M^2+K^2/l^2-2MK+2eM.rmJ|^2+M^2+K^2/l^2-2MK+2eM.
 
 Using echi=-mchi K and et=H-M-K we have
 eM=-mKM+chi(F_t,et+F_x,exi). Completing the H and K squares
-gives Egemathcal BcalB where
+gives EgeB where
 
- mathcal B=calB=chi^2{[1-l^2(1+m)^2]F^2-2[1+l^2(1+m)]FF_t-nF_t^2}
+ B={[1-l^2(1+m)^2]F^2-2[1+l^2(1+m)]FF_t-nF_t^2}
  +2chi F_x,exi.
 
 The exact identity
 [
- E-mathcal B=|calB=|mathrm J|^2-(H^2)/(n-1)rmJ|^2-(H^2)/(n-1)
+ E-B=|calB=|mathrm J|^2-(H^2)/(n-1)rmJ|^2-(H^2)/(n-1)
  +((H+(n-1)chi F_t)^2)/(n-1)
  +(frac Kl-lchi[(1+m)F+F_t])^2
  +thetachi^2F_t^2ge0
 ]
-verifies Egemathcal B.calB.
+verifies EgeB.
 
-Case sge s_0. Let mathcal CcalC be the brace in cref{eq:B-form}.
+Case sge s_0. Let C be the brace in cref{eq:B-form}.
 Its F^2 coefficient is nonnegative and 1le 1+l^2(1+m)le 2. The
 pressure estimates (eq:pressure-estimates)
-give mathcal CcalCge -5eps F_x always, and mathcal CcalCge P_0F_x
+give C -5eps F_x always, and C P_0F_x
 whenever -FF_tge P_0F_x. Where etane1 we have
 exige 3s/4; where eta=1 we have exi=s-epsige s-b with
 b^2=h_0(e,e). Both cases together with the pressure bounds yield
@@ -1400,8 +1400,8 @@ and cref{eq:trace-diff} this gives (eq:raw-inequality) on this
 regime (even without the d term).
 
 Case 0<s<s_0. Since mle -1/2, the leading coefficient of
-mathcal CcalC is at least 3/4, so
-mathcal CcalCge(3/4-4eps-neps^2)F^2ge tfrac12 F^2. Where eta=1
+C is at least 3/4, so
+C/4-4eps-neps^2)F^2ge tfrac12 F^2. Where eta=1
 one has exi/chige -1. Elsewhere a negative exi occurs only if
 sle|ddeta|_h and then
 |exi|/chile |ddeta|_h^2/(s_0eta)le C_1. By the quadratic
@@ -1409,7 +1409,7 @@ pressure upper bound,
 Egechi^2{(1/2-2C_1eps)F^2-2C_1b_0t^2}ge -C_2chi^2t^2.
 Since thetachi^2le 2a^2s_0^2 and tge1,
 [
- mathcal D(h_u,t_u)-calD(h_u,t_u)-mathcal D(h,t)calD(h,t)ge -2C_2a^2t^2
+ D(h_u,t_u)-calD(h_u,t_u)-D(h,t)calD(h,t)ge -2C_2a^2t^2
  ge -(t_u^2-t^2)+(d)/(2)t^2,
 ]
 where the last step uses t_u^2-t^2le 3a^2t^2 and dge 2(2C_2+3)a^2.
@@ -1425,15 +1425,15 @@ Define on M
 
 extended by (h,t) outside the auxilliary neighbourhood. Then
 h'ge h, t'ge t, and the change is supported in {r_A<W}.
-Because the flow of mathcal D-typecalD-type comparisons is continuous under
+Because the flow of D-typecalD-type comparisons is continuous under
 C^2-small perturbations and u_rto0 in C^3 on the annulus
-mathcal A_calA_zeta={.82W<r_A<.98W} by cref{lem:locality}, choose
+A_{.82W<r_A<.98W} by cref{lem:locality}, choose
 r small enough that the raw inequality (eq:raw-inequality)
 survives the cutoff with margin. This yields (eq:step-conclusion).
 
 For the distance gain introduce the effective height
 v_{eff}=zeta u and take r small enough that
-|dd v_{eff}|_hle .01 on mathcal A_calA_zeta. A curve of
+|dd v_{eff}|_hle .01 on A_ A curve of
 h'-length le L_*W from A to B has h-length le L_*W; its
 variation of v_{eff} off the graph region is small (at most
 .06L_*W), so the h'-length is
@@ -1456,7 +1456,7 @@ convergence in h'. The proof of cref{thm:step-main} is complete.
 
 We now iterate cref{thm:stretch} to produce a single complete metric h
 and constant t with all requested separations, and drift scalar
-mathcal D(h,t)calD(h,t)ge 2/5.
+D(h,t)calD(h,t)ge 2/5.
 
 ## Setup
 
@@ -1493,7 +1493,7 @@ dist_h(A_i,B_i)ge R_j and for each inotin I_j,
 dist_h(A_i,B_i)ge R_{j+1}. Then there is a smooth tildetilde hhge h
 with tildetilde h=hh=h off ∪_{iin I_j}{x:dist_g(A_i,x)<W} and
 [
- mathcal D(calD(tildetilde h,t)h,t)gemathcal D(h,t)calD(h,t)
+ D( h,t)h,t)geD(h,t)calD(h,t)
  -delta(tr_h g-tr_{tildetilde h}hg)t^2
  -d_j t^2,
 ]
@@ -1509,7 +1509,7 @@ metrics patch together smoothly; the support condition is preserved,
 and each pair iin I_j gains the factor L_* so that
 dist_{tildetilde h}h(A_i,B_i)ge R_{j+1}. The drift-scalar estimate is
 additive on disjoint supports, so the displayed bound holds with
-d_j replacing |I_j|cdot d_j/|I_j|.
+d_j replacing |I_j|· d_j/|I_j|.
 
 
 ## The whole process
@@ -1533,7 +1533,7 @@ tequiv T such that
 [
  dist_h(A_i,B_i)ge R_{k_i} quadfor all i,
  
- mathcal D(h,T)calD(h,T)getfrac25.
+ D(h,T)calD(h,T)getfrac25.
 ]
 The perturbations are local: h-g is supported in
 ∪_{jge0}∪_{iin I_j}{x:dist_g(A_i,x)<W}.
@@ -1542,22 +1542,22 @@ The perturbations are local: h-g is supported in
 Proof. 
 Start with h_0=g, t_0=T. In round j, apply cref{lem:round} with
 h:=h_j, h_{j+1}:=tildetilde h,h, t_j:=t_{j+1}:=T,
-I_j as described, and d_j:=2^{-j-1}sum_{j'ge0}min(1,delta_{j'})cdot
+I_j as described, and d_j:=2^{-j-1}sum_{j'ge0}min(1,delta_{j'})·
 (small enough so that sum_j d_j t^2le 1/10). Summing the drift
 inequality (lem:round) over j gives
 [
- mathcal D(h_calD(h_{j+1},T)gemathcal D(h_0,T)-calD(h_0,T)-delta,t^2
+ D(h_{j+1},T)geD(h_0,T)-calD(h_0,T)-delta,t^2
  sum_{mle j}(tr_{h_m}g-tr_{h_{m+1}}g)-t^2sum_{mle j} d_m.
 ]
 The trace difference sum telescopes to
 tr_g g-tr_{h_{j+1}}gle n because h_{j+1}ge...ge g implies
 tr_{h_{j+1}}gge0. Therefore for all j:
 [
- mathcal D(h_calD(h_{j+1},T)ge mathcal D(g,T)-ncalD(g,T)-ndelta T^2-(1)/(10).
+ D(h_{j+1},T)ge D(g,T)-ncalD(g,T)-ndelta T^2-(1)/(10).
 ]
-But mathcal D(g,T)=calD(g,T)=Scal_g+2lap_g T-|dd T|^2=Scal_gge 1
+But D(g,T)=calD(g,T)=Scal_g+2lap_g T-|dd T|^2=Scal_gge 1
 because T is constant. Choose delta so small that
-ndelta T^2le 1/2. Then mathcal D(h_calD(h_{j+1},T)ge 1-1/2-1/10=2/5.
+ndelta T^2le 1/2. Then D(h_{j+1},T)ge 1-1/2-1/10=2/5.
 The limit h:=lim_j h_j exists because each round changes h only
 by bounded amounts (the change is supported in fixed g-balls and
 the size grows geometrically, so the sequence is locally g-bounded
@@ -1575,19 +1575,19 @@ integer k the smooth warped metric
 ]
 Then
 [
- Scal_{hathat h}h=mathcal D(h,T)-(1+(1)/(k))|calD(h,T)-(1+(1)/(k))|dd T|^2_h
- =mathcal D(h,T)calD(h,T)getfrac25.
+ Scal_{hathat h}h=D(h,T)-(1+(1)/(k))|calD(h,T)-(1+(1)/(k))|dd T|^2_h
+ =D(h,T)calD(h,T)getfrac25.
 ]
 
 
 Proof. 
 Apply (eq:warp-identity) with p_alpha=T/k for all alpha, so
-P=T and sum_alpha|dd p_alpha|^2=kcdot(T/k)^2|dd T|^{-2}cdot|dd T|_h^2
+P=T and sum_alpha|dd p_alpha|^2=k·(T/k)^2|dd T|^{-2}·|dd T|_h^2
 =T?  wait, careful: |dd p_alpha|_h^2=(T/k)^2|dd(T/k)|_h^2... but p_alpha=T/k is constant, so dd p_alpha=0. Hence
 sum_alpha|dd p_alpha|_h^2=0 and the second term in
 (eq:warp-identity) is also zero because dd P=dd T=0.
 
-Actually we should double-check: P=sum_alpha p_alpha=kcdot T/k=T,
+Actually we should double-check: P=sum_alpha p_alpha=k· T/k=T,
 so dd P=0 and lap_h P=0. Thus (eq:warp-identity) gives
 Scal_{hathat h}h=Scal_h. But that contradicts Scal_hge2/5 being
 different from Scal_{hathat h}h!
@@ -1608,7 +1608,7 @@ metric has the same scalar curvature as h:
 Scal_{hathat h}h=Scal_h, and no additional scalar curvature is
 produced. The whole point of keeping t as a genuine function
 (not a constant) is that the drift term 2lap_h t-|dd t|^2 in
-mathcal DcalD pays for circle warps.
+D pays for circle warps.
 
 Since we do not need extra scalar curvature from the warps here ---
 we already have Scal_hge2/5 from cref{prop:stretched} (setting
@@ -1628,7 +1628,7 @@ and with dist_h(A_i,B_i)ge R_{k_i} for all i, where the
 
 Proof. 
 This is cref{prop:stretched} combined with the observation that
-mathcal D(h,T)=calD(h,T)=Scal_h when T is constant. The scalar-curvature
+D(h,T)=calD(h,T)=Scal_h when T is constant. The scalar-curvature
 lower bound transfers directly.
 
 
@@ -1666,7 +1666,7 @@ All of L_*,delta,W,T,R_0,D depend only on n.
 
 [A complete round]
 Let h_0 be a complete metric and t_0ge T smooth with
-mathcal D(h_0,t_0)calD(h_0,t_0)ge c+t_0^2 for some constant c. Let
+D(h_0,t_0)calD(h_0,t_0)ge c+t_0^2 for some constant c. Let
 (A_i,B_i)_{iin I} be a finite or countable family of nonempty
 closed pairs, with each A_i compact and dist_{h_0}(A_i,B_i)ge W.
 Suppose there are locally finite compact sets K_i with the
@@ -1676,7 +1676,7 @@ obtained by a locally finite sequence of compactly supported changes
 inside the K_i, such that
 
  dist_{h_1}(A_i,B_i)ge L_*Wquad∀ i,
- mathcal D(h_1,t_1)calD(h_1,t_1)ge c+(1-(n+1)delta)t_1^2.
+ D(h_1,t_1)calD(h_1,t_1)ge c+(1-(n+1)delta)t_1^2.
 
 The metric h_1 is complete.
 
@@ -1693,18 +1693,18 @@ pair still meets the separation hypothesis when its turn arrives. If
 ]
 Then Q_0=n, 0<Q_jle n, so A_jle1. We claim
 
- mathcal D(h^calD(h^{(j)},t^{(j)})ge c+A_j(t^{(j)})^2.
+ D(h^{(j)},t^{(j)})ge c+A_j(t^{(j)})^2.
 
 At j=0 this is the hypothesis. For the step, drop superscripts to
 write A,A',t,t',Q,Q' for old and new. (eq:step-conclusion)
 gives
 [
- mathcal D(h',t')calD(h',t')ge mathcal D(h,t)+(t'^2-t^2)calD(h,t)+(t'^2-t^2)
+ D(h',t')calD(h',t')ge D(h,t)+(t'^2-t^2)calD(h,t)+(t'^2-t^2)
  -(delta(Q-Q')+d)t'^2.
 ]
 Substituting the induction hypothesis and A'=A-(delta(Q-Q')+d),
 [
- mathcal D(h',t')calD(h',t')ge c+A't'^2+(A-1)(t'^2-t^2).
+ D(h',t')calD(h',t')ge c+A't'^2+(A-1)(t'^2-t^2).
 ]
 Since Ale1 and t'ge t, the last term is nonpositive. This
 proves (eq:trace-induction). Its coefficient is
@@ -1723,7 +1723,7 @@ The function t is auxiliary. We realize it by ordinary finite-dimensional
 warped products via the standard diagonal-warp identity.
 
 [Scalar curvature of diagonal circle warps]
-For smooth functions p_1,...,p_kcolon MtoR, the metric
+For smooth functions p_1,...,p_k: MtoR, the metric
 hathat h=h+h=h+sum_{alpha=1}^k e^{2p_alpha}ddtheta_alpha^2 on
 MtimesT^k has scalar curvature
 
@@ -1789,7 +1789,7 @@ R_j=L_*^jR_0, start with h^{[0]}=g and t^{[0]}=T, and work in
 round j with the metric h^{[j]}/R_j^2. At the start of round j
 require
 
- mathcal D(h^calD(h^{[j]}/R_j^2,t^{[j]})ge (R_j^2)/(2)+(t^{[j]})^2.
+ D(h^{[j]}/R_j^2,t^{[j]})ge (R_j^2)/(2)+(t^{[j]})^2.
 
 For j=0 this follows from Scal_gge1 and R_0^2/2ge T^2.
 
@@ -1805,7 +1805,7 @@ Return the output metric to original units. Scalar curvature, Laplacian,
 and squared gradient norms multiply by R^2 when a metric is divided
 by R^2, so the round estimate becomes
 
- mathcal D(h^calD(h^{[j+1]}/R_{j+1}^2,t^{[j+1]})
+ D(h^{[j+1]}/R_{j+1}^2,t^{[j+1]})
  ge frac{R_{j+1}^2}{2}+L_*^2(1-(n+1)delta)(t^{[j+1]})^2.
 
 By (eq:rounds-delta) the coefficient of the final square is >1,
@@ -1817,7 +1817,7 @@ its separation is at least WR_j as long as it is active while
 R_jto∞. Every compact set meets only finitely many outer balls,
 each processed finitely many times, so the sequence of metric changes
 is locally finite over the whole construction. The limit (h,t) is
-smooth with hge g, tge T, mathcal D(h,t)calD(h,t)ge1/2, and all
+smooth with hge g, tge T, D(h,t)calD(h,t)ge1/2, and all
 prescribed separations (eq:rounds-prescribed). Completeness of
 h follows by comparison with g.
 
@@ -1833,7 +1833,7 @@ this new list as (p_alpha). This gives
 ]
 Substituting in cref{lem:warp-identity} yields the left side of
 (eq:rounds-stabilized) bounded below by
-mathcal D(h,t)-1/10calD(h,t)-1/10ge 1/2-1/10=2/5.
+D(h,t)-1/10calD(h,t)-1/10ge 1/2-1/10=2/5.
 
 
 
@@ -1893,7 +1893,7 @@ entries. Tails for distinct face components are disjoint; intersections
 of sufficiently far tails over different entries are exactly the tails
 over their common further faces; the identifications commute.
 
-Each packet E is equipped with a continuous map q_Ecolon Eto X
+Each packet E is equipped with a continuous map q_E: Eto X
 recording the position in the original manifold X.
 
 A metric, scalar, warp, or set is compatible if, in every
@@ -1979,7 +1979,7 @@ circle warps. Write R_E for the scalar curvature of the full warped
 metric, and omega_E for the product of its circle lengths.
 
 For every jin J_r:
- a compatible continuous profile mu_jcolon Eto[-∞,∞]
+ a compatible continuous profile mu_j: Eto[-∞,∞]
 with locally Lipschitz finite truncations;
  a compatible smooth potential Pi_jgepi_0;
  compatible open cores U_j^+,U_j^- with
@@ -1991,7 +1991,7 @@ such that, almost everywhere on the open finite band of mu_j,
 
 Set G_j=E∖(U_j^+cup U_j^-) and
 
- D_E=bigl{xin Ecolon #{jin J_rcolon xin G_j}ge m-1bigr}.
+ D_E=bigl{xin E: #{jin J_r: xin G_j}ge m-1bigr}.
 
 The scalar requirement is
 
@@ -2008,7 +2008,7 @@ keeps dimension m and loses one label; a hit loses both one
 dimension and one label. The lower threshold m-2 defines a closed
 guard
 
- H_E^*={xin Ecolon#{jin J_r:xin G_j}ge m-2},
+ H_E^*={xin E:#{jin J_r:xin G_j}ge m-2},
 
 which contains the projections of the new required sets after the
 remaining cores have been enlarged (the point of ``shielding'' in the
@@ -2064,9 +2064,9 @@ Proof. [Sketch]
 For each center i, start a decreasing solution of the ODE
 2|y'^{!}|=.5y^2+pi_0 at large distance from A_i; the ODE has
 finite crossing length T(pi_0)=2pi√(2/pi_0). Compose with
-d_h(A_i,cdot) and set cores
-U_i^+={dist_h(A_i,cdot)<1},
-U_i^-={dist_h(A_i,cdot)>T(pi_0)+3}. The stipulated width of
+d_h(A_i,·) and set cores
+U_i^+={dist_h(A_i,·)<1},
+U_i^-={dist_h(A_i,·)>T(pi_0)+3}. The stipulated width of
 the outer balls ensures the required embedded sign conditions.
 
 For the radial label, use alternating separating plateaus of the
@@ -2203,7 +2203,7 @@ continuous family {t_r} approaching 1.
 
 At stage r, processed labels are 0,...,r-1, remaining set is
 J_r. Each packet E has base dimension m and a continuous collapse
-map q_Ecolon Eto M.
+map q_E: Eto M.
 
 [Countable-stage invariant]
 For each remaining label jin J_r retain: an extended-real continuous
@@ -2218,7 +2218,7 @@ q_E^{-1}(A_j)subset U_j^+ and q_E^{-1}(B_j)subset U_j^-.
 
 Set G_j=E∖(U_j^+cup U_j^-) and the required set
 
- D_E={xin Ecolon #{jin J_rcolon xin G_j}ge m-1}.
+ D_E={xin E: #{jin J_r: xin G_j}ge m-1}.
 
 The scalar requirement is
 
@@ -2236,7 +2236,7 @@ Laplacians unambiguous.
 
 Choose individual floors p_j^*>0 with
 
- sum_j p_j^*lefrac1{20}, frac1{20}le p_j^*le(1)/(20cdot 2^j).
+ sum_j p_j^*lefrac1{20}, frac1{20}le p_j^*le(1)/(20· 2^j).
 
 At stage zero, with completed warps giving stabilized scalar at least
 1/2, set Pi_j=p_j^*.
@@ -2419,7 +2419,7 @@ any limit metric as rto∞.
 
 [Reconstructed partitions]
 The compatible cuts of cref{prop:countable-construction} give a
-continuous proper map qcolon Mto M and, for every color i, closed
+continuous proper map q: Mto M and, for every color i, closed
 sets P_i,N_i,W_i satisfying
 
  &d_0(q(x),x)<1,
@@ -2437,7 +2437,7 @@ Choose eps_0,eps_1,...>0 with sum_reps_r<1; eps_0
 goes to the radial stage, later eps_r to color stages. Index
 post-radial reconstructions by r=0. For a finite reconstruction write
 [
- q_rcolon X_rto M, H_rcolon X_rto M,
+ q_r: X_rto M, H_r: X_rto M,
  Q_r=q_rcirc H_r^{-1},
 ]
 with q_r the collapse map and H_r a homeomorphism to the fixed
@@ -2446,8 +2446,8 @@ copy of M. Maintain
  d_0(Q_r(x),x)le E_r:=sum_{jle r}eps_j<1.
 
 
-Let c_rcolon X_{r+1}towidehatwidehat X_rX_r be the new cylinder collapse,
-h_rcolon X_{r+1}towidehatwidehat X_rX_r the homeomorphism compressing the
+Let c_r: X_{r+1}towidehatwidehat X_rX_r be the new cylinder collapse,
+h_r: X_{r+1}towidehatwidehat X_rX_r the homeomorphism compressing the
 inserted cylinders into the chosen strips; they agree off the inverse
 image of S_i. Define
 
@@ -2495,7 +2495,7 @@ There are locally finite open sets T_isupset W_i with
 
  T_isubset q^{-1}(B_0(x_i,2D))
  ∖ q^{-1}(A_icup B_i),
- #{icolon xin T_i}le n-2quad(xin M).
+ #{i: xin T_i}le n-2quad(xin M).
 
 
 
@@ -2545,7 +2545,7 @@ For every m, put
 
  tau_i(m)=sum_{iin Ssubset{1,...},|S|le n-2}
  t_S(m),
- t_S(m)=prod_{jin S}t_j(m)cdotprod_{jnotin S}(1-t_j(m)).
+ t_S(m)=prod_{jin S}t_j(m)·prod_{jnotin S}(1-t_j(m)).
 
 Here the sum runs over all subsets S of the color labels of size
 le n-2; each term is a product over all labels, and the number of
@@ -2594,7 +2594,7 @@ on shared faces.
 Let K be the cubical complex obtained by gluing the cubes
 Q(S,A) along shared faces. Then K is a locally finite
 simplicial complex of dimension at most n-2. The cubical
-coordinate map taucolon Mto K,
+coordinate map tau: Mto K,
 tau(m)=(tau_i(m))_{i} (only finitely many nonvanishing on bounded
 sets), is continuous.
 
@@ -2614,7 +2614,7 @@ because each tau_i is.
 
 Now define
 
- Fcolon Mto |K|, F(m)=tau(m).
+ F: Mto |K|, F(m)=tau(m).
 
 We can refine tau by pushing forward via q. That is: instead of
 (tau_i(m))_i, use (tau_i(q(m)))_i. Since q is proper and
@@ -2656,7 +2656,7 @@ bounded by C_n=4D+2.
 Proof. 
 By cref{lem:fiber}, if F(m)=F(m') then q(m)=q(m') hence
 d_0(m,m')<2. But also, since tau(m)=tau(m'), all points in
-q^{-1}(tau^{-1}(cdot)) land in the same fiber. For any y, take
+q^{-1}(tau^{-1}(·)) land in the same fiber. For any y, take
 any m,m'in F^{-1}(y); tau(m)=tau(m')=y, so m,m' both map to
 the same point in the closure of the same packet. Then the exact
 q-fiber analysis: q(m)notin A_icup B_i for any tau_i>0
@@ -2672,7 +2672,7 @@ q(m)in B_g(x_i,2D)), then |q(m)-q(m')|le 4D. Combined with the
 [Existence of width map]
 Every connected complete smooth Riemannian n-manifold (M,g)
 without boundary and with Scal_gge1, nge4, admits a continuous
-map Fcolon Mto |K| with dim Kle n-2 and diam_g F^{-1}(y)le C_n
+map F: Mto |K| with dim Kle n-2 and diam_g F^{-1}(y)le C_n
 for all y. The constant C_n=4D+2 depends only on n.
 
 
@@ -2700,7 +2700,7 @@ are governed by a single metric independent of the abstract complex.
 [Changing the simplex metric without changing fibers]
 
 Let kge0 be an integer. Suppose continuous functions
-t_icolon Yto[0,1] have locally finite supports, at least one
+t_i: Yto[0,1] have locally finite supports, at least one
 equals 1 at each point, and at most k are strictly between 0
 and 1. Then their coordinate map admits an injective conversion
 to a simplicial complex of dimension at most k with its uniform
@@ -2814,7 +2814,7 @@ regular splits, with compatible products in all sufficiently far ends.
 
 ## The split operation
 
-Let E be a packet of base dimension m and let ucolon EtoR
+Let E be a packet of base dimension m and let u: EtoR
 be a compatible smooth function with 0 regular, with zero set L,
 positive on q_E^{-1}(A_{j_0}), and negative on q_E^{-1}(B_{j_0}).
 Define Ω^pm={ugtrless 0}. Four pieces appear:
@@ -2831,7 +2831,7 @@ the flat Euclidean factors.
 
 The split inherits status entries: signs + or - for the two sides,
 * for the hit. The new label j_0 is processed (removed from the
-new mathcal J_calJ_{r+1}). Forced signs and count thresholds use the new
+new J_{r+1}). Forced signs and count thresholds use the new
 base dimension.
 
 ## Smooth structure of packets
@@ -2870,12 +2870,12 @@ Proof.
 Substitute y=√(2p)tantheta. The integrand becomes
 2(√(2/p))sec^2theta/(sec^2theta)=2√(2/p), and
 ytopm∞ corresponds to thetatopmpi/2. Thus the length is
-2√(2/p)cdotpi.
+2√(2/p)·pi.
 
 
 [Profile existence]
 Let E be a post-radial packet of dimension mge 2, and let
-mu_jcolon Eto[-∞,∞] be given with the profile
+mu_j: Eto[-∞,∞] be given with the profile
 inequality 2|gradmu_j|le a_rmu_j^2+Pi_j a.e. on each finite
 band. Then mu_{j'} exists for the next label j' with the required
 form, provided its cost on the required set stays bounded.
@@ -2897,8 +2897,8 @@ For initialization, use the following elementary construction.
 [Radial profile]
 Let (E,h) be a complete manifold and let A be a compact subset
 with Asubset U for an open core U. There is a profile
-mucolon Eto[-∞,∞] with mu=+∞ on U,
-mu=-∞ on E∖mathcal N_calN_{ε}(A) for some
+mu: Eto[-∞,∞] with mu=+∞ on U,
+mu=-∞ on E∖N_{ε}(A) for some
 ε>0, and satisfying
 2|gradmu|le .5mu^2+pi_0 on the finite band.
 
@@ -2907,11 +2907,11 @@ through all product faces.
 
 
 Proof. 
-Set mu=psi(dist_h(A,cdot)) where psi is the ODE-crossing
+Set mu=psi(dist_h(A,·)) where psi is the ODE-crossing
 profile with pi_0. Composing a 1-Lipschitz function with the
 1-Lipschitz distance gives a 1-Lipschitz profile whose
 grad operator factor is only better than a C^0 function's.
-Compatibility follows because dist_h(A,cdot) is exactly a product
+Compatibility follows because dist_h(A,·) is exactly a product
 function in each product tail.
 
 
@@ -2920,7 +2920,7 @@ function in each product tail.
 [Barriers]
 Let E be a post-radial packet, and let A be the phase of a local
 perimeter minimizer of the pressure-volume functional for a compatible
-smooth pressure pcolon EtoR. On each end and compact block the
+smooth pressure p: EtoR. On each end and compact block the
 phase A satisfies: contained in G_{j'} on the positive forced side
 and misses the negative forced side; the boundary S=∂^*A
 misses the core closures.
@@ -2988,7 +2988,7 @@ Proof.
 Bounded weights follow from compatibility and smoothness at the finite
 list of packet faces. Weighted growth: induction on the packet depth.
 Compact packets have bounded volume. A product Btimes(T,∞)^d
-has V_omega(B_R(x))le V_{omega_B}(B_R(x_B))cdot R^d, and the
+has V_omega(B_R(x))le V_{omega_B}(B_R(x_B))· R^d, and the
 recursion closes with the same exponent.
 
 
@@ -3015,7 +3015,7 @@ dimension le m-8 (or is empty when mle 7).
 ## Zero-density singular sets
 
 The remaining technical statements about singular sets pass through
-the following paraphrase: a nonempty singular set has mathcal H^calH^{m-8}
+the following paraphrase: a nonempty singular set has H^{m-8}
 measure zero but is dense in a subset that we call the conic skeleton.
 This is sufficient for the regularization step.
 
@@ -3030,7 +3030,7 @@ compactness properties, and their structure in product ends.
 A set A of locally finite perimeter in a post-radial packet E has
 weighted perimeter
 [
- P_omega(A;U)=int_{Ucap∂^*A}omega,ddmathcal H^calH^{m-1},
+ P_omega(A;U)=int_{Ucap∂^*A}omega,ddH^{m-1},
 ]
 with ∂^*A the reduced boundary. On the product
 widehatwidehat g=g+g=g+sum_{i=1}^q f_i^2ddtheta_i^2, the weight is
@@ -3038,7 +3038,7 @@ omega=prod f_i and ddmu=omegaddvol_g. Weighted divergence
 is Div_omega Y=omega^{-1}Div_g(omega Y).
 
 [Local absolute minimizer]
-For smooth pressure pcolon EtoR, a phase A is a local absolute
+For smooth pressure p: EtoR, a phase A is a local absolute
 minimizer if for every relatively compact open Usubset E and every
 locally finite-perimeter set B with A△ BSubset U,
 [
@@ -3108,8 +3108,8 @@ formula gives
 [
  P_omega(D;U)-P_omega(Acap D;U)
  leint_{Gcap U}Div_omega Y,ddmu
- -int_{∂^*U}Tr(chi_G),Ycdotnu_U,
- omega,ddmathcal H^calH^{m-1},
+ -int_{∂^*U}Tr(chi_G),Y·nu_U,
+ omega,ddH^{m-1},
 ]
 where Y is a smooth field with |Y|le1 pointing outward. The
 pressure-inequality pm pge c_* gives Div_omega Yge c_*
@@ -3159,17 +3159,17 @@ coincide.
 
 Proof. 
 Choose countably many nonnegative compactly supported continuous
-test functions varphi_a which separate locally integrable functions.
+test functions phi_a which separate locally integrable functions.
 For each a and shift c, let
 [
- I_a(c)=(inf_Aintvarphi_achi_Addmu,
-                sup_Aintvarphi_achi_Addmu),
+ I_a(c)=(inf_Aintphi_achi_Addmu,
+                sup_Aintphi_achi_Addmu),
 ]
 where inf and sup range over minimizers at c. Existence of
 minimizers is cref{lem:bv-compactness}. The preceding ordering says
 that the intervals I_a(c) for distinct c are disjoint. Each
 contains a rational number, so only countably many can be nonempty.
-If minimizers differ, some varphi_a distinguishes them and I_a(c)
+If minimizers differ, some phi_a distinguishes them and I_a(c)
 is nonempty. Hence there are at most countably many exceptional shifts
 on this space. The packet collection is countable, so their exceptional
 shifts have a countable union. Choose c in the remaining part of
@@ -3216,7 +3216,7 @@ from cite[Chapter 1 and Appendix A]{simonGMT}.
 [End convergence]
 Let E be a post-radial packet, B a face, and A, A_B the true
 cuts after applying cref{lem:generic-shift}. Then, in the product
-end over B, the translated cut (A - (cdot,t)) converges weakly to
+end over B, the translated cut (A - (·,t)) converges weakly to
 the product A_BtimesR^{d} as tto∞ in each one of the
 d normal coordinates separately or jointly. Similar product
 statements hold in each pure wall cylinder.
@@ -3243,8 +3243,8 @@ the following quadratic forms on the retained sides and cylinder.
 [Reserved form]
 For the wall or a joined side define, respectively,
 
- mathcal N_S(v)&=1.7calN_S(v)&=1.7int_S|grad v|^2ddmu_S,
- mathcal N_Ω(v)calN_Ω(v)
+ N_S(v)&=1.7calN_S(v)&=1.7int_S|grad v|^2ddmu_S,
+ N_Ω(v)calN_Ω(v)
    &=.8int_Ω|grad v_b|^2ddmu
      +1.7int_0^∞int_S|grad v_c|^2ddmu_Sdd t.
 
@@ -3266,8 +3266,8 @@ Proof.
 First variation of P_omega-int pddmu under the flow of Z
 gives
 [
- int_Somega(Div_S Z+<gradlogomega,Z>)ddmathcal HcalH
- =int_S pomega< Z,nu>ddmathcal H.calH.
+ int_Somega(Div_S Z+<gradlogomega,Z>)ddH
+ =int_S pomega< Z,nu>ddH.
 ]
 Substitute Z=W/omega: tangential weight derivatives cancel; the
 intrinsic Laplacian on S gives Div_S W with grad_S W=grad W
@@ -3310,19 +3310,19 @@ step 1]{simonGMT}. We record the exact adaptation.
 [Singular-dimension transfer]
 The Hausdorff content transfer of cite[Appendix A]{simonGMT} applies
 to the sequence of true cuts in a compact coordinate patch: for each
-s>m-8, if the singular set of the limit has mathcal H^scalH^s measure
+s>m-8, if the singular set of the limit has H^s measure
 zero, then so does the singular set of any sufficiently close true
 cut.
 
 
 Proof. [Sketch]
 Suppose on the contrary that the singular set of a true cut had
-positive mathcal H^scalH^s measure in the patch, for some s>m-8. The
+positive H^s measure in the patch, for some s>m-8. The
 Hausdorff-content density-selection argument of the reference gives an
 interior singular point x, scales rho_i↓0, and c>0
 with
 [
- rho_i^{-s}mathcal H^s_∞(ΣcalH^s_∞(Σcapbarbar B_B_{rho_i}(x))ge c.
+ rho_i^{-s}H^s_∞(ΣcalH^s_∞(Σcapbarbar B_B_{rho_i}(x))ge c.
 ]
 A strict tangent limit C along these scales is a minimizing cone
 whose singular set has content zero for all s>m-8. Choose a finite
@@ -3351,7 +3351,7 @@ the resulting dimension bound.
 
 Fix a post-radial packet of base dimension mge8. Let Σ be
 the singular set of a true cut. Geometric measure theory (see
-cref{lem:regular-structure}) gives dim_{mathcal H}calHΣle m-8.
+cref{lem:regular-structure}) gives dim_{H}Σle m-8.
 
 At every point xinΣ, tangent cones are minimizing cones whose
 spine is contained in the singular set of the cone; the spine dimension
@@ -3393,7 +3393,7 @@ d_F>0 and C_F<∞ such that, on the wall and on either joined
 side,
 
  c_0int_{delta<d_F}delta^{-2}v^2ddmu
- lemathcal N(v)+C_FcalN(v)+C_F|v|_2^2.
+ leN(v)+C_FcalN(v)+C_F|v|_2^2.
 
 Here delta(x)=dist(x,F) and c_0>0 depends only on m.
 
@@ -3427,7 +3427,7 @@ vertical vector field handles this. Choose a bounded function a on
 the regular part S_{rm reg} with 1.7age .8|A_b| at the seam; the
 boundary terms of the vector Hardy identity for the two pieces sum to
 [
- int_{S_{rm reg}}(-.8 A_bcdotnu_Ω+1.7a)v(0)^2ge0.
+ int_{S_{rm reg}}(-.8 A_b·nu_Ω+1.7a)v(0)^2ge0.
 ]
 Hence no vanishing trace condition is required.
 
@@ -3438,13 +3438,13 @@ There is a flatness number eta>0 (depending only on m and the
 fixed numerical coefficients) with the following property. Let F be
 a flat piece from cref{lem:local-flat} for this eta in a
 sufficiently accurate chart, and let D_ε be the smooth
-annulus potential supported in {ε<delta<constcdotε}
+annulus potential supported in {ε<delta<const·ε}
 with int D_ε=1 on shell, sup D_εle
 Mε^{-(m-8)}. Then there are ε_F>0 and
 C_F<∞ such that, for every 0<ε<ε_F,
 
  1.16int D_ε v^2ddmu
- le.78,mathcal N(v)+C_FcalN(v)+C_F|v|_2^2.
+ le.78,N(v)+C_FcalN(v)+C_F|v|_2^2.
 
 This holds on the true wall and either joined side, and on translated
 compact tests in a pure wall cylinder. The constants
@@ -3465,11 +3465,11 @@ extracted from a lattice, the q and q_∞ parts of nu are
 qphi_i with built-in small gradient, and a direct comparison to
 D_ε gives
 [
- 3.5intdelta^{-2}v^2le1.04mathcal N(v)+C_FcalN(v)+C_F|v|_2^2,
+ 3.5intdelta^{-2}v^2le1.04N(v)+C_FcalN(v)+C_F|v|_2^2,
 ]
 then a direct computation using delta^{-2}-to-D_ε
 comparison on the support gives the coefficient
-1.16cdot2.12cdot1.04/3.5<.731<.78.
+1.16·2.12·1.04/3.5<.731<.78.
 
 
 ## Consequences
@@ -3662,15 +3662,15 @@ All these data are exact compatible products. Cores only enlarge,
 closures stay in the designated pole interiors, forced sets and
 anchor restrictions are preserved.
  With G'_j=E∖(U_j'^+cup U_j'^-),
-the set H_E^*={xcolon#{jne j_0colon xin G'_j}ge m-2} is
+the set H_E^*={x:#{jne j_0: xin G'_j}ge m-2} is
 closed and misses Σ_E. In an exact collar over a face B, its
 projection is contained in H_B^*.
  For one common theta_*<.9, all walls and
 joined sides satisfy
 [
  int1.16sum_{jne j_0}D_j,v^2
- letheta_*(mathcal N(v)+e_0calN(v)+e_0sum_i|v|_2^2)
- le.9(mathcal N(v)+e_0calN(v)+e_0|v|_2^2).
+ letheta_*(N(v)+e_0calN(v)+e_0sum_i|v|_2^2)
+ le.9(N(v)+e_0calN(v)+e_0|v|_2^2).
 ]
 
 
@@ -3681,7 +3681,7 @@ E the risky set is K_E=Σ_Ecap H_E^*, compact by
 cref{lem:escape}. If m<8 it is empty.
 
 Enumerate all countable pairs (packet, possible local addition number)
-as nuge1. Assign allowance gamma_nu=.1cdot2^{-nu} split
+as nuge1. Assign allowance gamma_nu=.1·2^{-nu} split
 between the shell-scale choice and the simultaneous coface extensions.
  The bookkeeping bound on the total mathfrak h-costfrakh-cost is the
  per-update maximum of max{theta,.78} plus the summable
@@ -3697,7 +3697,7 @@ positive potential in the cover, one at a time.
 
 Finite termination: after N additions, set
 
- O_N={xin Ecolon#{jne j_0colon xin G_j^{(N)}}<m-2},
+ O_N={xin E:#{jne j_0: xin G_j^{(N)}}<m-2},
  K_E^{(N)}=K_E^{(0)}∖ O_N.
 
 Each O_N is open, and O_Nsubset O_{N+1}. Fix
@@ -3730,7 +3730,7 @@ H_E^*, supported inside the packet away from Σ.
 
 [Guarded approximation]
 The true cut, restricted to {chi=1}, admits smooth regular
-walls L with defining function ucolon EtoR satisfying
+walls L with defining function u: EtoR satisfying
 u>0 on q_E^{-1}(A_j) and u<0 on q_E^{-1}(B_j) for every
 remaining color label j, and with |u-psi|<10^{-3}psi on the
 guard, where psi is a fixed comparison function that vanishes on
@@ -3798,11 +3798,11 @@ ds^2+beta_s for sle 0. The raw joined metric is
 ds^2+beta_{min(s,0)}. Choose a smooth concave function Phi
 equal to t for tle-1 and to 0 for tge1, with
 0lePhi'le1, and intPhi''=-1=-int|Phi''|. Substituting
-Phi(cdot/w) for a narrow width w>0 produces a C^∞ metric
+Phi(·/w) for a narrow width w>0 produces a C^∞ metric
 converging to the raw in the sense stated. The scalar curvature
 concentration at the corner is
 [
- Scal(Phi)toScal(raw)+signcdotddmathcal H^calH^{m-1}
+ Scal(Phi)toScal(raw)+sign·ddH^{m-1}
   measure at ∂
 ]
 and integrating by parts against a smooth test transfers this
@@ -4080,7 +4080,7 @@ Comm. Anal. Geom. 10 (2002), 441--467.
 
 
 Michael, J.~H., Simon, L.~M. Sobolev and mean-value inequalities on
-generalized submanifolds of mathbb R^n.bbR^n.
+generalized submanifolds of R^n.
 Comm. Pure Appl. Math. 26 (1973), 361--379.